This repair kit is sourced directly from the original manufacturer, and is used for Senco brad nailers. The kit would include all parts shown in photograph above, and the kit can be used to repair nailers. Please note not all o-rings are included, check diagram for o-rings and seals that are sold separately. Installing this repair kit can fix air leaks, or other common problems that can occur.
Troubleshooting
This part works with the following brands:
Senco
This part works with the following products:
Nailer
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Prior to start I went over the paperwork showing the parts that would be replaced. I then Identified all the parts that were supplied and set them aside. I then took my nailer apart setting the removed parts next to the new ones. After cleaning and wiping on the supplied grease I put the nailer back together using the new parts. Test
... Read morefired the nailer and worked it fine.
I did take me a few minutes to figure out that one of the parts was a tool supplied to remove/replace the trigger actuator. Other than that an easy fix.
The repair kit does come with a chart that shows you where all of the parts that are in the gun are located. This helped very much when you have to tear down the gun to install them.
Took everything apart and cleaned parts. Replaced all O rings and greased them . Unscrewed the trigger valve there was a wrench in the kit to remove it . It was very easy put back together and works great
Fred
Did you find this story helpful?
Thank you for voting!
Wouldn\'t fire air came out in trigger area when trigger is pulled.
I replaced all the parts included in the repair kit, and the problem seems to be resolved. I\'ll note that two of the o-rings that were supposed to be included in the repair kit were missing, but my old ones seemed to be in good enough shape, so I just left them on (with a little added grease). Everything seems to be working fine now.
<
... Read morebr />
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
