Part Location Diagram of A021001202 Echo Carburetor Rb-k84
See part A-1A in the diagram
( Grid squares measure 1x1 inch )

Carburetor Rb-k84 A021001202

Manufactured by:
Echo
ERP Number:
ERP11826207
Part Number:
A021001202
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(5 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine manufacturer authorized replacement part that is designed for use with Echo handheld lawn and garden equipment. The purpose of a carburetor is to mix air and gas into a highly combustible mixture that is then sent into the engine. This assembly includes a metal body carburetor with a rubber primer bulb. Over time the carburetor on your small engine can become defective, causing sluggish performance and poor fuel economy. When replacing carburetor it is advised that you also replace carburetor gaskets to ensure proper air tight seal for optimum performance.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Trimmer
  • Pole Saw
  • Hedge Trimmer
  • Edger

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Carb was clogged bad and primer bulb bad

scott from MIDLAND, Texas

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Empty gas from tank
Disconnects fuel lines
Pull out fuel filter and two gas lines
Take off air filter cover
Remove air filter
Remove 2 screws holding air filter housing as well as carburetor
Disconnect throttle cable
Remove carburetor
Replace carburetor
Hook up throttle cable ... Read more >Tighten 2 screws on air filter housing
Install gas lines kit and fuel filter
Put new air filter on
Put air filter housing back on
Start engine
Go for it!
Did you find this story helpful?
Thank you for voting!

No high speed fuel available

Robert from HARLETON, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
A021001202
Replaced the carb, fuel lines and tank filter.
Did you find this story helpful?
Thank you for voting!

Carbureror.

PATRICIA from Forestdale, Massachusetts

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
A021001202
Replaced the old carburetor with the new. Everything went well.
Did you find this story helpful?
Thank you for voting!

Bad carburetor

William from Crossville, Tennessee

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
A021001202
Remove the air cleaner cover, remove the air cleaner
Remove the fuel line and throttle from the carburetor
Remove the screws holding the air cleaner base and carburetor
Install the new carburetor and air cleaner base
Attach the fuel lines and the throttle to the carburetor
Install the rest of the air cleaner
Did you find this story helpful?
Thank you for voting!

Carburetor throttle plate cracked

Kurt from Lindenhurst, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
A021001202
Replaced old carburetor with two screws from choke plate removed. Very easy, hardest part was connecting throttle cable linkage.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11826207
Manufacturer Part Number: A021001202
Brand Model Number Description
Echo HCA-265 Hedge Trimmer - Hedge Clipper Articulating
Echo HCA-266 Hedge Trimmer - Articulating Hedge Trimmer
Echo Pas-265 Trimmer - Pro Attachment Series
Echo PAS-266 Trimmer - Gas Power Source Attachement
Echo PE-265 Edger - Edger
Echo PE-265S Edger - Edger
Echo PE-266 Edger - 25.4 cc Edger
Echo PE-266S Edger - 25.4 cc Edger
Echo PPT-265 Pole Saw - Power Pruner Telescoping Shaft
Echo PPT-265S Pole Saw - Power Pruner Telescoping Shaft
Echo PPT-266 Pole Saw - Power Pruner
Echo PPT-266H Pole Saw - Power Pruner
Echo SHC-266 Hedge Trimmer - Short Shafted Hedge Trimmer
Echo SRM-265 Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-265S Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-265T Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-265U Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-266S Trimmer - Steel Drive Shaft Trimmer
Echo SRM-266T Trimmer - High Torque Trimmer
Echo SRM-266U Trimmer - Straight Shaft Trimmer / Brushcutter