This oil hose is an OEM direct from Husqvarna. The durable plastic part is made for use with many chainsaws. The hose secures the oil pump assembly to the oil screen, sending oil to lubricate the chain components. The oil hose is sold individually. A screwdriver and a socket set are helpful in the repair. Please refer to the specific manual for further instructions.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Just what the doctor ordered
If you have a Husqvarna 455 with a ball leak when it's not running this is all you need even arrived a day early
Frank - June 22, 2019
Verified Purchase
★★★★★
★★★★★
Works great.
Part was very reasonable priced. Shipping is high but so is driving to the store that has the part. Replacement of part is not bad if you are one who usually fixes everything that brakes. Just take your time and lay everything out. Don’t lost any pieces. Everything will be very dirty because of leaking oil and sawdust. Watch YouTube video will help you definitely. You can do this. It’s worth it to have a saw that doesn’t leak oil on everything.
Guest - September 15, 2019
Verified Purchase
★★★★★
★★★★★
Chain oiler repair
Correct parts great condition perfect fit arrived in a timely manner
Guest - December 19, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove side cover
Remove bar and chain
Remove clutch assembly
Remove metal cover
Remove lower bolts for the handle
Clean and blow off all areas
Remove outer oil line
Remove oil pump screw and oil pump
Reach in from the bottom of saw moving handle off to the side and pull out inner tank lin
... Read moree and filter
Remove filter from old line and install on new line
assemble in reverse order
First empty oil from reservoir. Disengage clutch top bar so one can remove cover. Remove 2 nuts that hold cover on. Remove cover. Remove chain and bar. Remove spark plug. Screw in piston stop. Place clutch removal socket on ratchet. Rotate clockwise to remove then spin off clutch don\\\'t lose needle bearing on clutch shaft. Use Alle
... Read moren wrench to remove 1 screw that holds on pump. Remove hose if you want to replace hose to reservoir. Remember carrying handle and flip over saw and use pliers to grab hose and remove from base of reservoir. Reverse process to install necessary parts. Time needed. 45 minutes
Read less
Did you find this story helpful?
Thank you for voting!
Wear and tear, leaking bar oil, fuel lined cracked and running lean,
I took a old 1/2 socket brought it to the grinding wheel. Made the tool to take the clutch off, It took a couple of times at the grinder for a good fit on the clutch. Use the 1/2 inch socket you get more leverage. Replaced both oil hoses, After 10 years they were a little worn. Both oil hoses fit perfectly.Husky 455 up and running cool.
... Read moreWill buy from you guys again.
Drain oil, remove clutch,oil pump to replace 1st oil hose. Remove bottom shell to replace oil hose coming from the oil tank.This repair was for a Husqvarna 460 rancher very easy to fix.There is lot of videos on YouTube on how to repair chainsaws.Replacement parts.com has the best prices for do it your self repairs so you wont have to take
... Read more to a repair shop and they will charge you hundreds of dollars.
- Remove clutch cover and blade
- Remove clutch using special tool (left-handed thread)
- Remove oil pump (pay close attention at location of components)
- Clean pump and area thoroughly (small parts, be careful using compressed air)
- Install new oil hose from oil reservoir to pump
- Reverse the process and
... Read morere-assemble all components (do not over torque clutch)
Replaced both the oil line from the reservoir to the pump and the oil line from the pump to the bar, the pinion gear, oil pump and put loctite 518 on all connections. That stopped the leaking.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/lawn-and-garden/chainsaw/hoses-and-tubes/"},{"position":2,"name":"585514001","title":"585514001","url":""}]
_WW_4.gif "Part Location Diagram of 585514001 Husqvarna Oil Hose")
_WW_4.gif "Part Location Diagram of 585514001 Husqvarna Oil Hose")
