Part Location Diagram of 575493401 Husqvarna Filter Housing
See part A-3 in the diagram
( Grid squares measure 1x1 inch )

Filter Housing 575493401

Manufactured by:
Husqvarna
ERP Number:
ERP11824041
Part Number:
575493401
Original Equipment Manufacturer ?
$10.46
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic Husqvarna replacement part, sourced from the original manufacturer for use with chainsaws. The plastic housing is used to mount the air filters to the carburetor's air intake. This housing is available as an individual replacement part, please note a philips head screwdriver is needed to install the housing.

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Craftsman
This part works with the following products:
  • Chainsaw
Part# 575493401 replaces these:
545062101, 575493401,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

ran over the saw with excavator that weighs 11,000 pounds (not completely) 1 day old saw

Dave from Los Gatos, California

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Pulled bar and chain from saw (not bent) removed recoil starter, removed handle and chain brake.
Removed carb ( not damaged). Removed main chassis case and replaced with new one purchased.
Some high temp. silicone used, replace carb adapter, replace stop switch screw holder.
replace top cylinder cover and starter assembl y and chain brake and handle.
Put new fuel and oil in respective tanks and adjusted richness.
Fired right up and started cutting logs for firewood. Have run saw for a week now. No problems.
A job for the (not of faint heart). Take your time and work on clean surface, well lit.
keep everything clean and remember what screw goes where and your repair is done much more quickly and cheaper than to send the (brand new ) saw out to a shop, only to have them keep the saw for two weeks. Very happy with parts supplier.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11824041
Manufacturer Part Number: 575493401
Brand Model Number Description
Husqvarna 120 Chainsaw - 120 Mark Ii
Husqvarna 1202020 Chainsaw - 120 2020- (Us/Ca)
Husqvarna 120E Chainsaw - 120e Mark Ii
Husqvarna 120EMARKII Chainsaw - 120e Mark Ii - 967861908 (2018-05)
Husqvarna 120MARKII Chainsaw - 120 Mark Ii - 967861934 (2019-04)
Husqvarna 120MARKIII Chainsaw - 120 Mark Iii
Husqvarna 125LDX Trimmer - String Trimmer
Husqvarna 125LDXTEST Trimmer - 125ldx Test (2010-06)
Husqvarna 230 Chainsaw - Chain Saw
Husqvarna 235 Chainsaw - Chainsaw
Husqvarna 235E Chainsaw - Chainsaw
Husqvarna 236 Chainsaw - Chain Saw
Husqvarna 236E Chainsaw - Chain Saw
Husqvarna 240 Chainsaw - Chainsaw
Husqvarna 240E Chainsaw - Chainsaw
Husqvarna 240ETRIOBRAKE Chainsaw - Chain Saw
Craftsman 358381600 Chainsaw - Chainsaw
Husqvarna 952802268 Chainsaw - Husqvarna Chainsaw Model 952802268 Parts
Jonsered CS2234 Chainsaw - Chain Saw
Jonsered CS2234S Chainsaw - Chain Saw
Jonsered CS2238 Chainsaw - Chain Saw
Jonsered CS2238S Chainsaw - Chain Saw