This is genuine OEM sourced replacement burner set, not an aftermarket imitation. These parts are specially manufactured for Weber gas grills. Burners are connected to the control valves and it is where the flames would rise from. Please note, this set includes (3) stainless steel burner tubes and one (1) carry over tube and the hardware to secure it. Carryover tube allows the fuel to flow from one burner to another creating an even flame. You will need a wrench or a flat-head screwdriver to complete this repair. • First make sure the tank is disconnected • Remove the carryover tube • Remove the screws securing the old burners • Disconnect old burners from control valves and replace them with a new burners • Secure burners with the screws • Secure the carryover tube • Connect the gas tank and test the burners
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy purchase
The parts arrived, were wrapped safely and in good condition. After installation of the burners and flavor bars my grill was as good as new. I just wish that I had ordered the hold down screw replacements with the burners as I had to go back a second time and pay shipping for three small screws.
Guest - August 26, 2019
Verified Purchase
★★★★★
★★★★★
Parts fit and worked perfectly. Easy install.
My grill is working like new again. Good for another 10 years!!
Guest - March 26, 2020
Verified Purchase
★★★★★
★★★★★
Grill repair
Parts came in a timely manner with instructions that made this an easy repair
Guest - May 10, 2020
Verified Purchase
★★★★★
★★★★★
Everything fit and worked perfect.
All the parts I ordered where correct and arrived in good amount of time and my grill cooks like it’s brand new.
Guest - July 24, 2020
Verified Purchase
★★★★★
★★★★★
10 days to get the parts!
Cost of this product. $53.36 + shipping (economy) $13.00 +tax = $68.02
Let that be a lesson.
Guest - November 12, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the grates and the flavorizer bars. I had to drill out some of the screws because they were so rusted. But once I was able to remove all of the screws and remove the old burners. I cleaned out the grill and installed the new burners. Replaced the flavorizer bars and grates. Works like it\'s a new grill. Thank you!
1. Removed grates
2. Removed Flavorizer bars
3. Remove bottom tray.
5. Removed ignitor from old burner tube
6. I DID NOT remove the manifold from under the control panel. Instead, there is enough room to pull the burner tubes towards the right side of the cook box releasing them from the stabilization screws on th
... Read moree left side of the cook box and remove them one by one.
7. This is a great time to clean your cook box thoroughly.
8. Install new burner tubes, sliding them through appropriate holes in the cook box and onto their respective manifold inlets.
9. Ensure the end tube connector is inserted in the holes of the 1st and 3rd tubes and the middle tube slides into the opening of the end tube connector.
10. Ensure the flat ends of the tubes are inserted under the heads of the stabilization screws on the left side of the cook box.
11. Reinstall the burner igniter on the 1st tube and reconnect wires.
12. Reinstall Flavorizer Bars.
13. Reinstall grates.
14. Reinstall bottom tray.
All was completed but I received three end pieces not the center piece so I ordered a second set of burner tubes hopefully I get the center burner tube this time Thank You PS I am keeping all the extra burner tubes .
1 removed old hold down mounting screws.
2 removed old burner tubes.
3 placed new burner tubes in position
4 drilled old mounting hole a little bigger to accept new screws.
5 installed new mounting screws and tightened them down.
6 turned propane tank on lit the grill all works perfect
Did you find this story helpful?
Thank you for voting!
Inside burner tubes and flavorizing bars rusted and broke
1. Started by removing control panel, grates and old flavorizing bars
2. Unhooked gas
3. Removed burner tube bracket
4. Removed burner tubes.
Burner tube bracket screws rusted and broke off so I had to go store buy metal 3/8 drill bit. also got screw and bolt. drilled new hole which delayed me.
Put every
... Read morething back together and everything seems to be working great.
After various applications of penetrating oil waited a few minutes and slowly removed the attaching screws. Preventing the screws from breaking was the hard part, since the new ones provided with the kit were larger and did not fit. After that was a staight forward install of the tubes. Works like new again.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10511331
Manufacturer Part Number: 67820
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Grill","title":"Grill","url":"/parts/bbq/grill/"},{"position":2,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/bbq/grill/hoses-and-tubes/"},{"position":3,"name":"67820","title":"67820","url":""}]
_WW_1.gif "Part Location Diagram of 67820 Weber Set Of Burner Tubes")
_WW_1.gif "Part Location Diagram of 67820 Weber Set Of Burner Tubes")
