This genuine manufacturer sourced replacement burner tube set is designed for use with Weber gas grills. Burners are connected to the control valves and it is where the flames would rise from. These burners are made out of stainless steel and this set includes two (2) burner tubes, one (1) carry over tube and the hardware used to secure the burners. You would need a wrench to complete this repair • First make sure gas tank is disconnected • Remove screws securing the old burners • Disconnect old burners from control valves and replace them with a new burners • Secure burners using the included hardware and • Secure the carryover tube • Connect the gas tank and test the burners
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
correct part, works great
part works great
Guest - December 9, 2019
Verified Purchase
★★★★★
★★★★★
Grill Parts
Item arrived in a timely manner and was exactly what I need. Great job!
Richard - February 5, 2020
Verified Purchase
★★★★★
★★★★★
Gas grill burner replacement
The part arrived as scheduled Everything was included, even instructions. The website was great,
All is good !! Will be ordering flavor
grids next
Guest - April 20, 2020
Verified Purchase
★★★★★
★★★★★
Perfect replacement part.
Their online parts schematic to help with part selection was great. I also order several other grill parts that fit great. Thanks for offering this help online.
Guest - April 20, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair and works great as expected
Parts arrived in good condition and was easily installed
Guest - June 18, 2020
Verified Purchase
★★★★★
★★★★★
Burner Tube Set
The parts went together easily and grill works great again.
Guest - July 29, 2020
Verified Purchase
★★★★★
★★★★★
Great
Thanks for the help
Guest - June 8, 2021
Verified Purchase
★★★★★
★★★★★
Park arrived quickly. However it was of the wrong model, my fault. Had to return it.
You could not find my replacement part. Had to go to the manufacturer to get it.
Guest - July 23, 2025
Verified Purchase
★★★★★
★★★★★
Wrong part indicated on your website.
Was way too big. Returned part, waiting for refund.
Guest - May 27, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the old burners and the igniter wiring kit. (old igniter still worked, however, the spark box had burnt down to nothing because the burner flame constantly hits it. Since I was replacing the burners, I thought it wouldn\'t hurt to replace the igniter kit too.)
2. Installed the new burners and the igniter kit.
The bu
... Read morerner kit even came with new spider screens.
Read less
Did you find this story helpful?
Thank you for voting!
Burner tubes were rusted and not lighting up properly
Removed grates
Unscrewed old burner tubes on outside near tank
Unscrewed old burner tubes inside with ratchet (which I didn\'t have correct fitting so had to borrow)
Slide burners out
Places new burner tubes in and lined up with outside part. Easier if I took off knob to push it down then added remaining pieces
<
... Read morebr />Used ratchet to tighten inside grill
Replaced grates
Lit up grill and works great
Disconnected gas.
Removed panel with control knobs.
Tool out grill and flavorizer pieces
Removed gas manifold.
Removed old burner tubes.
Removed old igniter.
All the above took about 10 min.
Installed everything back in reverse order from above.
Tested for gas leaks
Reinstall to
... Read moreok 10-15 min.
Spent more time cleaning the grill then I did with the repair.
Both the igniter kit and the burner tube set include installation instructions. I was grilling in no time. Thank you
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
