Removed one screw and dropped motor, then removed motor from the bracket, two nuts and spacers. Installed new motor and reinstalled wheel, plugged in unit and finished with a new grill.
Did you find this story helpful?
Thank you for voting!
Replace 20-yr. old ventilation fan and blower wheel in bathroom
Simply removed 2 nuts holding old fan motor to mounting bracket and conducted a direct replacement into the same mounting holes with new fan motor. Bolt spacing was identical. The only problem encountered was that the new recommended blower wheel did not match the depth dimensions of the original and as such it would not fit back in the o
... Read moreriginal duct work housing. This was corrected by carefully removing the original blower wheel from the old motor and securing it to the shaft of the new motor carefully with cyanoacrylate Super Glue after cleaning mating parts.
Removed old motor and blower wheel by removing nuts holding it to bracket.
Pushed new blower wheel onto new motor.
Fastened with nuts the motor blower wheel assembly onto bracket.
Installed entire assembly into duct/vent housing.
Biggest issue was tabs on one side of bracket would not hold bracket into vent housi
... Read moreng. I tried to screw it in and couldn\'t get it to work so finally I bent the bracket tabs out further to get more friction in vent housing. It is important for blower wheel/motor assembly to be square in vent housing or blower wheel will jam into vent housing and not turn thus burn out the motor. That is what ruined my original motor in my opinion.
At 84 on a ladder it tired me. Your replace motor was the exact motor. I really think you have a great company.
Will seek you again if my other 5 bathroom vents need replacement motors...the house was constructed in 1987.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10432365
Manufacturer Part Number: S99080518
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
