This is an authentic replacement burner assembly sourced from original equipment manufacturer. Designed for use with Napoleon grills. The shape and position of this assembly creates an even cooking area for the best results. It is made out of stainless steel and it includes left, right, center burner. To complete this repair no tools are needed. • Make sure to disconnect the gas tank • Disconnect the electrode • Remove old burner and an electrode • Secure the new burner with an electrode • Re-connect and test the grill
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great part, easy to install! Works great!
When ordering the part, I couldn't track it! Not knowing when it would arrive!! Once I got it, not a problem! Works great!!
Guest - July 25, 2019
Verified Purchase
★★★★★
★★★★★
Ready for Spring
Exactly what I ordered- looking forward to grilling again.
Guest - February 1, 2020
Verified Purchase
★★★★★
★★★★★
Perfect replacement
Easy replacement and perfect fit. Rapid delivery and a fair price.
George - August 11, 2020
Verified Purchase
★★★★★
★★★★★
Burner fit great
The burner fit great. It would be great if they provided replacement screws.
I recommend a slightly larger size since the grill hole has enlarged. I had to drill out one hole and get a Stainless steel bolt to replace the old screw.
James - September 27, 2025
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Pull the grates and the drip pans and the back heating rack to make room.
Remove the 2 screws located at 1/4 and 3/4 the way across and then pop out the burner from the rear first. They are hidden by a shield that covers the back of the burner.
Install the new burner, just lead the front tubes into their holes by the burner c
... Read moreontrols. It slips together easily. Replace screws and put everything else back on.
I would test the burner before putting the grates on, to make sure it burns evenly.
Read less
Did you find this story helpful?
Thank you for voting!
Burner and sear plates were corroded and had some holes in them.
1. Shut off gas supply.
2. Removed grates, old sear plates, and burner assembly.
3. Cleaned the grill compartment.
4. Installed the new burner and sear plates.
5. Put the grates back in.
6. Opened the gas supply valve and tested for proper operation, ok.
Did you find this story helpful?
Thank you for voting!
The burner on my grill was cracked, creating hot spots.
Removed old rusted parts and replaced them with the new parts which was a perfect fit. Grill now works like new. Saved hundreds of dollars over replacing the grill. Only minor issue was the sear plate mounts rusted out as well. So bent a few pieces of scrap stainless steel and screwed them into the grill with self tapping screws. Once the
... Read more mounts were replaced the plates and burning just basically lay in the grill. Also used self tapping screws to replace one of the burner mounting screws that had rusted out as well. Overall very pleased and hope to get an additional 5 years with these new parts.
Removed two screws with socket to remove burner from back of grill and slide out heat shield. Slipped old burner out. Slid new burner into place. Started to screws to hold burner, slid heat shield back into place, tightened two screws. Done and good as new!
1. Removed the 2 screws on the top back of the burner.
2. Lifted the old burner up and out.
3. Slid in the new burner.
4. Started the screws about halfway.
5. Slid the burner shield in place.
6. Tighten the screws.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10425219
Manufacturer Part Number: N010-0693
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Grill","title":"Grill","url":"/parts/bbq/grill/"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/parts/bbq/grill/elements-and-burners/"},{"position":3,"name":"N010-0693","title":"N010-0693","url":""}]
