Does this part fit my model?
Need help finding your model number?This is the discharge valve assembly for a variety of pumps. This OEM valve assembly does not come with the pump head, but features a retaining clip, spring, valve disc and valve bumper, all of which measure approximately 1-inch in diameter. Over time, valves can collect debris or corrode, and with normal wear and tear, they can get damaged, leak, or restrict the flow of fluid through the pump. If your pump is leaking on/around the discharge valve, or if the pump has higher pressure or a low flow rate, this discharge valve would be worth inspecting to see if it needs replacing. Replacing this assembly is easy and requires you to first power off the pump and disconnect the pump head and gasket. You can then remove the old assembly and install the new one. It is recommended that you replace the gasket at this juncture as well, but it is not mandatory. With the new assembly installed, reinstall the pump head and test your pump.
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Compressor exhaust valve failed.
Keith from Winfield, Pennsylvania
Valves in pump head were broke
Rodney from Asheboro, North Carolina
jenny air compressor
mark from st francis, Wisconsin
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
