This is an authentic manufacturer-approved replacement part which is specially designed for use with Jenny pumps. It helps to distribute the pressure and provide an air-tight seal between the connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and applications of this hardware. Over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality rubber o-ring is sold individually.
Troubleshooting
This part works with the following brands:
Jenny
This part works with the following products:
Compressor
Engine
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I removed the piston unloader from the top of the pump and saw that the brass piston had broken. I simply screwed in the new piston unloader to the top of the pump and the compressor didn\'t leak any air. I also replaced the spring and o rings that were around the piston unloader while I had them apart. A simple fix thanks to ereplacement
... Read more parts!
Read less
Did you find this story helpful?
Thank you for voting!
I have an air compressor that air was leaking out the breather.
Tony from FARWELL, Nebraska
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1. First I removed both the heads.
2. Removed the unloaded valves and replaced them
3. Removed and replaced the intake and the exhaust check valves along with the o-rings and the gaskets.
I used a parts break down and ordered the parts. The parts where correct and easy to install. It took about 2 hours and 3 cups
... Read more of coffee. Very satisfied.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/compressor/seals-and-gaskets/"},{"position":2,"name":"104-1020","title":"104-1020","url":""}]
