This is an authentic Jenny replacement part, sourced from the original manufacturer for use with four cylinder single stage stroke pumps. The special gasket is commonly used to form a seal between the bearing cap and the crankcase. This gasket is available as an individual replacement part, please see model diagram for associative parts.
Troubleshooting
This part works with the following brands:
Jenny
This part works with the following products:
Compressor
Engine
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I unbolted the cast iron cylinder from crankcase and used a cylinder hone to hone cylinder. Replaced connecting rod which had seized due to lack of oil. Had to clean aluminum from seized rod off of crankshaft. Used fine emery cloth to do this. Replaced ring set on piston and lubricated with light oil and slipped piston back in cylinder. T
... Read morehe cylinder is tapered on the lower end to facilitate assembly, so the use of a spring compressor was not necessary. I used the snap ring pliers to remove the retainers to replace the valve plates. Then the valve plate and head was assembled using the new gaskets. I have been repairing these presses since 1970. The presses I am running in my laundry were all made in the early 60\'s. The compressors were all replaced with Emglo\'s which are the best quality I could find, and can be rebuilt many times. As long as you keep oil in them they last a very long time. The other parts came from other suppliers.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/compressor/seals-and-gaskets/"},{"position":2,"name":"104-1000-01","title":"104-1000-01","url":""}]
