- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Wire Harness K008902H01
- Manufactured by:
- Hunter
- ERP Number:
- ERP10370585
- Part Number:
- K008902H01
Does this part fit my model?
Need help finding your model number?Troubleshooting
- Hunter
- Ceiling Fan
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
- < Prev
- 1
- Next >
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hello Joseph, Thank you for your inquiry. We show part# K008902H01 listed as the compatible wire harness for your model. We hope this helps.
Hello Linda, Thank you for your inquiry. You should be able to replace the chain, by using a screw driver to remove the base to access the chain switch which is part of the wiring harness. You may need to replace the switch, but you should be able to see where the chain attaches and replace it. We hope this helps.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
No medium fan speed
Albert from SCHAUMBURG, Illinois
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- K008902H01
Remove ceiling fan light cover. Unplug power connector. The ceiling light fan cover can be moved to a work table.
This fan had two capacitors. One for medium speed and one split high/low voltage capacitor.
CAUTION GÜán+Å should be used, the capacitors hold a high voltage. The capacitors should be disch ... Read more arged by using a metal screwdriver with a rubber or wooden handle. Crossing the capacitors wires will discharge the capacitors.
The replacement wiring harness came with one three speed capacitor and a 4 contact slide switch reverse/forward. It also came with the pull chain 3 speed switch. Simply remove old wire harnesses and reverse installation. Plug the wire harness light cover in and attach with the screws that were removed.
Power on, check speeds and fan directions.
- < Prev
- 1
- Next >
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.