Part Location Diagram of RO-460615 Dirt Devil Style 7 Belt
See part 29 in the diagram
( Grid squares measure 1x1 inch )

Style 7 Belt RO-460615

Manufactured by:
Dirt Devil
ERP Number:
ERP10334533
Part Number:
RO-460615
Original Equipment Manufacturer ?
$5.17
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This Belt is an OEM part direct from the original vacuum manufacturer. This is a number 7 style belt that is used to link the brush roll to the motor assembly. This is an individually sold part and is made of rubber. It is recommended that the belt is replaced every 3-6 months as part of regular maintenance to keep your machine running at peak performance.

Troubleshooting

This part works with the following brands:
  • Hoover
  • Dirt Devil
  • Royal
This part works with the following products:
  • Carpet Cleaner
  • Water Pump

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

2 units: Dirt Devil Carpet Cleaner & Bissell Spot Lifter Carpet Cleaner

DW from Littleton, Colorado

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Dirt Devil needed general cleaning and maintenance. I replaced the Brush Roller Assembly and its drive belt for good measure. Works like new now.

Bissell Spot Lifter would not function. There was a broken \"clutch\" in the Brush Cartridge which had to purchased as an assembly. Replaced Cartridge drive belt at the same time. T he repair was a success.

Replacing the parts took less than 15 minutes on each unit, however, disassembly, cleaning and reassembly took an additional 2 hours for both machines.
Did you find this story helpful?
Thank you for voting!

Old belt was streched and filter had deteriated.

David from Cressona, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
RO-700750, RO-460615
The filter slides on cover over the float, The belt cover had to be removed. Pull out the roller and belt comes with it. Remove the old belt. I cleaned up the roller. Put new belt over motor shaft and over correct end of roller. Align roller ends with slots and stretch out belt as you insert roller ends into slots. Replace cover.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10334533
Manufacturer Part Number: RO-460615
Brand Model Number Description
Hoover FH50010 Water Pump - SteamVac Carpet Cleaner
Hoover FH50030 Water Pump - SteamVac Carpet Cleaner
Hoover FH50035 Water Pump - SteamVac Carpet Cleaner
Dirt Devil MCE7300 Carpet Cleaner - Easy Steamer Carpet Cleaner
Dirt Devil MCE7350 Carpet Cleaner - Vision Easy Steamer
Dirt Devil MCE7450 Carpet Cleaner - Vision Easy Steamer
Royal RY7600 Carpet Cleaner - Carpet Cleaner