This is a genuine set of two (2) steel planer blades. Those blades are sourced from original equipment manufacturer designed for use with Delta planers. These double edged high speed steel blades keeps a sharp edge longer. Planer's knives are machined to make very precise cuts. When your knife blades wear down, you won't get the level of precision you require. To replace the blades you will need a wrench.
I watched your you tube video on how to replace the knives in my planer. I did make a copy if someone else may need it.
https://www.youtube.com/watch?v=fKutXypDl3s
Did you find this story helpful?
Thank you for voting!
Cutter head stopped turning and unit would not turn on.
1. Unplugged unit from power.
2. Remover 4 screws holding switch cover.
3. Removed switch from cover and snapped in new switch.
4. Removed wires from old switch and connected to new switch.
5. Installed switch and secured with the screws.
6. Removed brush covers and removed old brushes.
7. Inserted ne
... Read morew brushes and replaced brush covers.
8. Removed old blades and installed new blades.
I was reading one of the repair stories that the person wrote, that he watched the video you made for replacing the planer blades. I watched that video, and I had my planer going again. Thank you for the video.
1. Placed planer on work bench.
2. Removed guard/hood/shield from planer. Screws for hood are removable by hand.
3. Used heavy duty Allen Wrench that came w/ planer to loosen 6 screws per blade. Do NOT remove screws or plate which holds blades in place. The plates on my Delta have springs which help lift the plates. Loosen pl
... Read moreates enough to remove the blades. Blades are held in place with short metal pegs over which the blades can be lifted/removed. The blades are sharp so use the magnetized holder/remover that may have been part of the planer unit when purchased. Hand removal is an option as well. Either way, wear THIN, supple leather gloves during removal.
4. Install replacement blades. Tighten screws on plate holding the blades.
5. Reattach guard/hood/shield with hand tightened screws.
6. Test plane a scrap metal-free board 2 or more inches wide.
7. Smile as planer is stored and ready for next project.
Took old blades off and put new blades on. That was the easy part. Until I found your web site I was having problems finding the right replacement blades. Your site was great. It made finding what I needed and ordering very easy. Thank you.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
