Genuine Delta replacement part Includes 1 Carbon Brush with wire lead and brush spring attached, 2 are required. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Troubleshooting
This part works with the following brands:
Delta
Black and Decker
This part works with the following products:
Miter Saw
Saw
★
Customer Part Reviews
?
4.7
Average Rating (out of 5):
★★★★★
★★★★★
(13 Reviews)
Click to filter by ratings:
5 stars
12
4 stars
0
3 stars
0
2 stars
0
1 star
1
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Always a great place with great selection & price!
Just what I needed yo keep and good ole saw going.
Guest - May 7, 2019
Verified Purchase
★★★★★
★★★★★
Quick delivery Works great
Quick delivery Works great
Guest - August 2, 2019
Verified Purchase
★★★★★
★★★★★
Worked well
The brushes arrived ahead of time well packaged and they worked very well.
Guest - November 21, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected.
My new part arrived on time and fit perfectly. Excellent quality parts
My saw is working like new again. Thanks so much.
Guest - December 28, 2019
Verified Purchase
★★★★★
★★★★★
Great service
Parts arrived quickly and fit perfectly
Guest - March 5, 2020
Verified Purchase
★★★★★
★★★★★
Delt Carbon Brush
Great parta, very easy to replace. Part is working perfectly
Guest - March 20, 2020
Verified Purchase
★★★★★
★★★★★
EXACTLY WHAT I NEEDED,TRACKING WAS EASY, SO YEAH THIS WAS A GOOD SOURCE!
PART FIT LIKE NEW
Guest - August 28, 2020
Verified Purchase
★★★★★
★★★★★
Worked as expected.
We have used ereplacement many time in about a 4 year time frame. Web site and service are very good
Guest - December 21, 2020
Verified Purchase
★★★★★
★★★★★
Carbon Brush Replacement for Delta Cmpd Miter saw
My set of brushes worked great for my Delta 10" compound miter saw; and was exactly what I needed. I couldn't get the saw to turn on with the old brushes. New parts arrived quickly.
I spent more time looking locally for brushes. Save yourself some time and just order thru ereplacement parts.com. The saw brush installation is "easy-peasy". If necessary consult youtube videos. My saw works again like new!
Guest - December 30, 2020
Verified Purchase
★★★★★
★★★★★
30 year old miter saw
I did a little research and found that the failure of the electric brake on my 30 year old Delta miter saw was probably due to worn out brushes or the commutator was dirty. I was able to clean the commutator and the brushes didn't look bad but when I tried it again, still no brake. So I bought a set of brushes. Still no brake. Oh well, I am still using the saw just without the brake.
Richard - April 27, 2021
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Pretty straight forward task.
1-Remove the motor housing end cap/cover.
2-Brushes are now exposed at end of motor so disconnect electric the wire leads from the carbon brushes.
3-Slide out the brushes from inside the brush holders
4- Insert the new brushes into the holders, then just reverse the process to re-as
... Read moresemble your electric motor steps 4 to 1
Remove 3 phillips screws from the motor cover, remove end cover, unplug connector from old brushes. Slide out old brush and install new brush, reinstall connector, reinstall end cover . Try out saw, It works fine.
Remove the back motor cap, disconnect the brushes. Use pliers to remove brush holders. Then press the new brush holders in & install brushes and connect them to the leads. Reattach the motor cap. Runs like new.
1. Unplug the saw from the outlet.
2. Remove the motor cap to expose brushes.
3. Disconnect wire from the brush and slide the old brush out.
4. Slide the new brush in and reconnect the wire.
1. Removed the black plastic motor end cover.
2. Removed the brushes.
3. Installed the new set of brushes.
4. Needle nose pliers may help if you have a hard time compressing the spring while installing.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
