Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Exact replacement part, works great right out of the box
I replaced this fan motor in my bathroom which actually took longer cleaning the original than it did to remove and install the motor itself. It works better than the original motor, my wife is really happy!!
Guest - January 31, 2020
Verified Purchase
★★★★★
★★★★★
Perfect fit
Motor fit just as described. Web site search engine was accurate. Thank you, quiet bathroom fan = quiet wife. LOL=ƒÿé
Guest - June 4, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair - great part & value - works perfectly!
Bathroom fan is now nearly noiseless. Better than when it was new.
Guest - September 4, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I gave e Replacement the fan model number and they said they had the motor and squirrel cage.I thought that $90 was a bit high, but what choice did I have. The motor fit perfectly and the squirrel cage attached easily. Installing the motor took 5 minutes, and installing the fan and light took another 10-15 minutes. Works perfectly.
Did you find this story helpful?
Thank you for voting!
Motor burned out and this model was no longer available
1. Shut off the breaker to the fan in the bathroom
2. Took off the plastic grill with springs
3. Unplugged the fan and removed the fan motor and plate it was attached to.
4. The receptacle was cracked so I disconnected the wires and replaced that.
5. I replaced the old motor with my new one and used new spacers
... Read more />6. Plugged in the motor and put the new motor and motor bracket back up in the housing it was originally in and installed my new plastic grill with springs.
7. Turned the breaker back on and turned the fan on and bingo - worked great!
8. I used replacement parts because my fan was discontinued and a new replacement fan with the same CFM would have required a different size hole and that got into a whole different can of worms. Keep it simple and just replace your parts if possible and do it yourself.
Read less
Did you find this story helpful?
Thank you for voting!
Had to replace the blower motor in my bathroom blower.
I had previously removed the blower and then ordered the replacement. After I received the replacement, it was easy to install the blower. Total time, if you include the time it took to remove the old blower was about 30 minutes. I probably saved myself anywhere from $75 to $150 by doing it myself.
Did you find this story helpful?
Thank you for voting!
Motor bearings were worn and noisy. Lots of axial play in motor shaft noted upon disassembly. Wheel was ok, just dirty.
Turn off light and fan.
Remove light lens.
Remove light bulb.
Use utility knife to cut thru caulk I used a year ago to secure cover to ceiling. (I cleaned and oiled the motor and wheel about 15 months ago when the bathroom fan became too noisy.)
Unplug light and motor.
Use Crescent wrench to loosen and remove
... Read more nut and washers securing light housing.
Use old straight bladed screwdriver or putty knife to pop loose the single tab on one side of the sheet metal plate that the motor is mounted to. It is hard to tell which side has the single tab vs the two tabs, so it took a while to do this step.
Mark the fan housing to indicate for future repairs which side the single tab is located on.
R&R motor from bracket using socket/ratchet, or crescent wrench.
Reverse order to re-assemble.
Use a bit of caulk or glue to attach cover to ceiling. Secure with blue tape until dry.
New installation sounds and works great!
One nut to remove cover from bath vent fan, One screw to remove motor and fan wheel from housing. Remove pressed on fan wheel and a nut driver to remove motor from frame. Reverse to reinstall.
Pry the lens off the unit
Remove the light bulb to access the nut holding the light reflector
Unplug the light housing electrical connector
There are three tabs in slots holding the fan and fan mount.
Gently work a screwdriver between the fan mount and the outer shell of the unit on the side of the single tab
... Read more>Unplug the fan and pry the tab out of the slot, the fan can be pulled down in a hinging movement releasing the other two tabs.
Gently pry the fan blade off the fan shaft
Remove the two nuts holding the fan motor and remove the motor
Reassemble in the reverse order, but when inserting the fan mount into the outer shell put the two tabs in first and gently hinge the fan assembly up and push up till the third tab snaps into place.
1. Turned off light switch and taped down
2. Removed ventilator cover
3. Removed light bulb
4. Unplugged light from the main unit
5. Removed nut attaching light housing to the main unit and removed light housing
6. Unplugged fan from the main unit
7. Used screwdriver to gently removed fan housing from t
... Read morehe main unit.
8. Replaced fan and blower wheel and reassembled in reverse order.
1. Disconnected power
2. Removed vent cover
3. Unplugged power cord from fan motor to housing
4. Removed screw securing motor bracket to housing
5. Removed motor bracket and fan motor
6. Assembled new motor bracket, fan motor and fan blade
7. Inserted new assembly in housing
8. Secured motor brack
... Read moreet to housing with screw
9. Plugged power cord from motor into housing socket
10. Replaced vent cover
11. Restored power
Range Hood
- Broan Range Vent Hood Model 714-D (714D, 714 D) Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
