( Grid squares measure 1x1 inch )

Nt Srv Asm Thermo Kit-mod 9905 S1179A000

Manufactured by:
Broan
ERP Number:
ERP10279878
Part Number:
S1179A000
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(5 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Troubleshooting

This part works with the following brands:
  • Nutone
  • Broan
This part works with the following products:
  • Heater

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

heater kept clicking off

bernard from Guilford, Connecticut

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
S1179A000
Guessed what issue was and went to website to confirm that thermostat was likely problem. Ordered and installed new part. Repair: Shut circuit breaker, remove cover, remove thermostat attachment screws and electrical connections, install new thermostat and electrical connection, turn on breaker, test heater, replace cover. Needed needl e nose pliers to detach tight electrical connection.
Did you find this story helpful?
Thank you for voting!

Neither the heating element nor the blower were working.

Donna from CROWLEY, Louisiana

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
S1179A000
Open the light cover.
Remove the glass lens for safe keeping and to reduce weight.
Remove two screws holding the cover and light fixture.
Unplug the light fixture and set it and the cover aside.
Unplug the heater assembly and back out partially two screws.
Remove the heater assembly.
Remove two screws h olding the thermo coupler to the assembly and unplug the two electric connectors.
Install the new thermo coupler and test at a convenient outlet prior to reinstall.
Reinstall in reverse order. Once the heater assembly is reinstalled and plugged in test for vibrations.
Complete reinstall.
Did you find this story helpful?
Thank you for voting!

Heat sensor was faulty

William from West Long Branch, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
S1179A000
Removed 2 screws and the wires . Installed the new sensor wit the two screws and connected the wires.
Did you find this story helpful?
Thank you for voting!

Nutone Heat-A-Vent Light heater stopped working.

Jonathan from Edison, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
S1179A000
First, I made sure the electric breaker was turned off to the fixture.
Removed the ceiling finish grill, lens and light bulb to expose the inside of the unit.
Removed two sheet metal screws that hold the bottom of the heater/fan assembly and slid it out of the two top clips.
Unclipped the wire connectors on the thermo pr otector, unscrewed and replaced with the new one, reconnect the wire clips, and done.
Reinstall the ceiling grill.
Did you find this story helpful?
Thank you for voting!

Heater would shut off

Robert from Pawtucket, Rhode Island

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
S1179A000
Shut off the power, remove 2 wires, remove the 2 screws, and replace.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10279878
Manufacturer Part Number: S1179A000
Brand Model Number Description
Nutone 9905 Heater - Ceiling Heater
Nutone 9960 Heater - Ceiling Heater
Broan 9960R01 Heater - Deluxe Series Heat-A-Lite - 1500 Watts
Nutone 9965 Heater - Ceiling Heater
Nutone 9965F Heater - Ceiling Heater
Broan 9965R01 Heater - Deluxe Series Heat-A-Ventlite - 1500 Watts / 70 Cfm / 4.0 Sones