A genuine item which is supplied directly from the original equipment manufacturer for use with Bissell carpet cleaners. It is an identical replacement for a worn or missing pump belt which was originally installed on a new unit. Keep in mind this high-quality component is made of durable rubber material and is sold individually. Make sure to check the appropriate diagrams of your model for the correct location and application of this hardware.
Troubleshooting
This part works with the following brands:
Bissell
This part works with the following products:
Carpet Cleaner
★
Customer Part Reviews
?
4.5
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect Fit... saved my rug cleaner from the dump.
Excellent, fast service. Easy fix and my machine works. I use eReplacement quite a bit because of the service AND I get parts views that help me understand the machine I'm fixing. I can save the cost of a new machine for just a little effort and cost. Thank You to the folks at eReplacement!
Greg - March 21, 2023
Verified Purchase
★★★★★
★★★★★
Arrived on time
The part arrived as promised and installed easily.
Guest - September 15, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
No problems installing new parts, went well. Only problem I had was with one of the hoses being on the wrong side of the water outlet, could not get left side to come all the way down. Corrected this problem the top went into place easily. Make sure this hose is on the inside if the water drain in bottom of sweeper tank area.
1. Removed the brush roller screws and retainer.
2. Removed brush belt
3. Replaced pump belt
4. Replaced brush roller belt
5. Reinstalled brush roller retainer and screws.
The actuator arm of the diverter valve had broken off. The new diverter valve only took a few minutes to replace. There were six screws holding the top cover to the main body of the shampooer. After removing the screws and taking the cap off the water flow indicator the top cover lifted off the machine. The arm of the actuator valve f
... Read moreed through the hole in the top cover and snapped into the control knob. The old diverter valve gasket pulled out and the new one fit into the groove. I replaced the pump belt simply due to the age of the machine. The whole project to about 45 min. I\'d have to say it was a medium difficulty project. After replacing the parts I simply placed the cover back on the base and put the six screws back in.
Read less
Did you find this story helpful?
Thank you for voting!
No Water was flowing out when trigger was being squeezed
1. Removed the 6 screws holding the base together
2. Marked (color code) all the hose lines leading to the pump
3. Disconnected all hose lines on Pump
4. Removed 4 screws holding pump in place, and smooth belt.
5. Removed pump by tilting inward side up, this allowed toothed belt to become loose and came off gear.
<
... Read morebr />6. Disconnected all plastic lines and cleaned. Checked all joints to insure flow through them then reassembled all lines.
7. Snapped out Autoload Receiver and replaced with new part
8. Reassembled entire base and screwed on new Flow Indicator.
Easy to do with Phillips Screwdriver, Pliers (Standard and Needle Nose).
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10272518
Manufacturer Part Number: BR-1020
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
