Genuine Bissell supplied replacement part for a variety of Carpet Cleaners. This item is sold individually. When replacing Right Belt it is recommended to replace the Left Belt as well for best operation. The belts should be checked periodically. If belts are worn or stretched they need to be replaced to provide best performance.
I just removed the broken part with a phillips screwdriver & replaced it with the new one. I was unable to get my replacement parts from Bissell. They were unavailable for a shampooer I had only had 2 years. If not for eReplacement Parts, I would have been very unhappy.
Thank you for your assistance & prompt delivery of the parts
... Read more.
Read less
Did you find this story helpful?
Thank you for voting!
Bissell heated carpet cleaner was dropped down a flight of stairs
Replace side covers
Replace front suction assembly
Replace belts (they were 6 years old and well used)
Replace detent lever (the most time consuming)
I\'m old school...take it apart and remember the order and where you took it off of. lower end was easy, 5 screws only and only one way to reinstall.
... Read morer />Detent lever required disassembly of upper half of handle followed by disassembly of the lower half. after that it was easy, just two screws. then reverse the order you got there and its done...
Read less
Did you find this story helpful?
Thank you for voting!
Belts and swing arms worn out on my carpet cleaner
Removed old parts and replaced. Diagram on you site was like a road map, very easy to see how to make the repair. Machine is working like new. You guys service is the best, parts arrived in three days including the day I ordered. Keep up the good work.
Did you find this story helpful?
Thank you for voting!
Rollers did not work on my bissell rug cleaner less than a year old !
Dismantled bottom front of carpet cleaner and took out brushes and drive belts.
Cut and removed dog hair from around brushes to free up rotation.
Replaced both drive belts with new parts.
Reassembled carpet cleaner and tested.
Works as good as new!
1. Removed the end plates from the brush assembly.
2. Removed the cover plate of the assembly.
3. Removed the brushes.
4. Replaced the belts.
5. Reinstalled.
Did you find this story helpful?
Thank you for voting!
Brush roller would not spin. Pump belt broken. End caps broken. Just a mess!
Removed all broken or missing parts above and used instructions that came with belts. Easy to follow, no problem. Relined and locked side end caps with side brushes and put together with locking screw. no problem. you guys did not have the front nozzle for the 8920 so I got some automotive glue and screw clamps to hold till glue set u
... Read morep over night. Reinstalled all of the above. all is well. Cost me $33.00 for parts from e-replacement and five dollars for the glue. Only took 3 days from the time of ordering till finish. thanks guys, Neely
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10271479
Manufacturer Part Number: B-203-6804
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
