See part A-17 in the diagram
( Grid squares measure 1x1 inch )
Gauge A14993
Manufactured by:
DeWALT
ERP Number: ERP10186510
Part Number: A14993
?
Delivers in 3-5 Business Days!
Product Description
?
This item has been OEM sourced to ensure a high level of quality. The gauge is intended to be used with air compressors from DeWalt. This part attaches to the regulator manifold and is used to indicate the air PSI within the tank. This item will require a torx driver set and a wrench set to install. The gauge is sold as an individual replacement part.
Frequently Purchased Together
?
Troubleshooting
This part works with the following brands:
Craftsman
DeWALT
Porter Cable
Black and Decker
DeVilbiss
This part works with the following products:
Part# A14993 replaces these:
A14993, PA14993,
★
Customer Part Reviews
?
Sort by:
Highest Rating
Most Recent
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Easy fix
It is always easier to make a repair when you get a part that is the same as original. Everything went back together in the space provided. Thanks.
Guest - November 28, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask a question
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?
✖
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Sort by:
Most Helpful
Most Recent
Sorry, we couldn't find any existing installation instruction that matched.
Compressor fell over and broke gauges
John from Grinnell, Iowa
1 person
found this instruction helpful.
Easy
Less than 15 mins
Screw drivers, Wrench set
Remove face plate to remove remaining stubs. Screw on new gauges. Replace face plate. Bada boom
Gauge broke while handling compressor.
Rodolfo from Houston, Texas
1 person
found this instruction helpful.
Easy
Less than 15 mins
Screwed new gauge on with hands only.
Gauge was broken
Gordon from arlington, Washington
1 person
found this instruction helpful.
Easy
Less than 15 mins
Wrench set
Thread the old one off. Then thread the new one on. Done.
Broke off at the threads
Carl from RIVERDALE, Georgia
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
Wrench (Adjustable)
Removed old part, put Teflon tape on the threads of the new one and screwed in new gauge. Simple easy fix, thanks
Gages corroded and broke
James from Riverside, California
0 of 1 people
found this instruction helpful.
Easy
15 - 30 mins
Screw drivers, Wrench set
Removed face plate screws. Removed both gages. Replace each with Teflon tape and reinsert gages in respective positions. Replaced face plate and screws
Gauge had a pin-hole in it and needed to be replaced.
Richard from Roggen, Colorado
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
Screw drivers, Wrench (Adjustable)
Unscrewed old gauges and screwed in the new gauges.
Broken brass connector on gauge
Jay from Vernonia, Oregon
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
Wrench set
Removed old brass connector
Guage broke off.
Mike from Lafayette, Louisiana
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
Wrench (Adjustable)
Simply replaced the gauge. Unscrewed the base, screwed on the replacement gauge.
Gauge not working
Cory from Woodbury, Minnesota
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
Wrench set
Replaced the gauge. Just screw it in. Thank you!
Air compressor tiped over and Tank pressure gauge broke off.
Jackie from Sandy, Utah
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
Wrench (Adjustable)
I just unscrewed the nut and put the new one in its place. Plugged it in and it worked.
Model Cross Reference
This part works with the following models:
ERP Number: ERP10186510 A14993
Brand
Model Number
Description
Black and Decker
919-16561
Compressor
- 7.0 Horse Power 60 Gallon Compressor
Black and Decker
919-16781
Compressor
- Compressor
Craftsman
919-18419
Compressor
- A 7.0hp 60g Vs Ol 1stg 24
Craftsman
919-72728
Compressor
- A 7.0hp 60g Vs Ol 1stg 24
Craftsman
919165613
Compressor
- Compressor
Craftsman
919167812
Compressor
- Air Compressor
Craftsman
919184192
Compressor
- Air Compressor
Craftsman
919184193
Compressor
- Air Compressor
Porter Cable
C7501
Compressor
- Compressor
Porter Cable
C7501M
Compressor
- Compressor
Porter Cable
C7550
Compressor
- 175 PSI 2-Stage 80 Gal Oil-Lube Compressor
Porter Cable
CPLC7060V
Compressor
- Air Compressor
Porter Cable
CPLMC7580V2C
Compressor
- A 7.5hp 80g Vs Ol 2stg 24
DeWALT
D55167
Compressor
- 200PSI, 15Gal., 120V Electric Compressor
DeWALT
D55168
Compressor
- 200PSI, 15Gal., 120V Electric Compressor
DeVilbiss
E7540
Compressor
- 175 PSI Lube Compressor
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"A14993","title":"A14993","url":""}]
