Part Location Diagram of 947964-01 DeWALT Protector,cord
See part 48 in the diagram
( Grid squares measure 1x1 inch )

Protector,cord 947964-01

Manufactured by:
DeWALT
ERP Number:
ERP10186131
Part Number:
947964-01
Original Equipment Manufacturer ?
$6.16
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine OEM sourced replacement component which is designed for use with DeWALT and Black and Decker power tools. The cord protector fits through the opening in the housing where the power cord is wired, it will protect the base of the cord from getting bent or pinched. It is made of high-quality rubber and it is sold individually.

Troubleshooting

This part works with the following brands:
  • DeWALT
  • Black and Decker
  • DeVilbiss
This part works with the following products:
  • Grinder
  • Angle Grinder

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Insulation casing on cord was compromised

bob from cincinnati, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
947964-01, 330072-98
Removed the plastic housing at rear of grinder
Removed screw holding the cord in place (internally)
Loosened the set-screws holding the wire (remember where white/black wires were)
Slid cord protector over cord
Cut wires back using the old cord as a guide
Attached electrical clips
Tightened wires on the set screws
Reassembled the unit
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10186131
Manufacturer Part Number: 947964-01
Brand Model Number Description
Black and Decker 27712 Angle Grinder - Angle Grinder
Black and Decker 4074 Angle Grinder - 7 Angle Grinder
Black and Decker 4279 Angle Grinder - 6 Straight Grinder
DeWALT D25960K Hammer Drill - Demolition Hammer
DeWALT D25960K-AR Hammer - 16kg Demolition Hammer 28
DeWALT D25960K-B2 Hammer - 16kg Demolition Hammer 28
DeWALT D25960K-B3 Hammer - 16kg Demolition Hammer W/
DeWALT D25980-B3 Demolition Hammer - 2100w Heavy Duty Pavement
DeWALT D28755 Chop Saw - Chop Saw
DeWALT DW474 Angle Grinder - Angle Grinder
DeWALT DW474-AR Angle Grinder - Large Angle Driver
DeWALT DW474-B2 Grinder - Large Angle Grinder
DeWALT DW474-B3 Grinder - Large Angle Grinder
DeWALT DW474-BR Angle Grinder - Angle Grinder
DeWALT DW474-G3 Grinder - Large Angle Grinder
DeWALT DW476-AR Angle Grinder - Angle Grinder
DeWALT DW846 Angle Grinder - Grinder
DeWALT DW848-AR Angle Grinder - Angle Grinder
DeWALT DW848-B2 Grinder - 7 Angle Grinder
DeWALT DW848-B3 Grinder - Angle Grinder
DeWALT DW848-BR Angle Grinder - Angle Grinder
DeWALT DW848-G3 Grinder - Angle Grinder
DeWALT DW850 Angle Grinder - 230MM 2000W Grinder
DeWALT DW852 Angle Grinder - 230MM 2200W Grinder
DeWALT DW852-AR Grinder - Angle Grinder
DeWALT DW852-B2 Grinder - Angle Grinder
DeWALT DW852-B3 Grinder - Angle Grinder
DeWALT DW852-BR Grinder - Angle Grinder
DeWALT DW852-G3 Grinder - Angle Grinder
DeWALT DW882 Angle Grinder - 6 inch Straight Grinder