Part Location Diagram of 587233-00 DeWALT Switch
See part 5 in the diagram
( Grid squares measure 1x1 inch )

Switch 587233-00

Manufactured by:
DeWALT
ERP Number:
ERP10180440
Part Number:
587233-00
Original Equipment Manufacturer ?
$7.15
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(5 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an original Black and Decker replacement part manufactured for use with belt sanders. Switches are a common cause of power tool failure, and they are an easy part to replace. Signs of a wearing switch are trouble starting or running on and off. The switch is sold individually.

Troubleshooting

This part works with the following brands:
  • Black and Decker
  • DeWALT
This part works with the following products:
  • Jig Saw
  • Sander Polisher
Part# 587233-00 replaces these:
587233-00,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Switch quit working

Douglas from Owatonna, Minnesota

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
587233-00
1. Removed the casing
2. Removed the wires from the switch
3. Connected wires to new switch
4. Placed casing back on the sanders
Did you find this story helpful?
Thank you for voting!

Replaced trigger switch

Erik from Seattle, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
587233-00
Disassembled sander, removed trigger switch and replaced it wit new one
Did you find this story helpful?
Thank you for voting!

Contacts inside of the switch were burnt (after 15 years of usage)

Igor from Sunnyvale, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
587233-00
1. Opened (took it apart) the sander
2. Soldered out the switch
3. Soldered in the new switch
4. Put all together
Did you find this story helpful?
Thank you for voting!

Worn starter, would turn on intermittently

JP from Salt Lake City, Utah

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
587233-00
Black & Decker Dragster type 3. Removed six short screws on one side, two long screws on other side. Removed rubber plug, undid nut and pried off handle. Pulled apart half of casing. Unscrewed 4 wires attaching trigger. Installed new one. Reassembled casing. Tested and runs perfectly again.
Did you find this story helpful?
Thank you for voting!

Needed new switch

juan from toa baja, Puerto Rico

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
587233-00
Remove one half of the housing. Remove the wires from the switch. First make a wiring diagram. Connect the wires to the new switch and reassemble housing.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10180440
Manufacturer Part Number: 587233-00
Brand Model Number Description
Black and Decker BR318 Belt or Drum Sander - Belt Sander
Black and Decker BR318-AR Sander - 10075
Black and Decker BR318-B2C Sander Polisher - Belt Sander
Black and Decker BR318-B3 Sander Polisher - Belt Sander
Black and Decker BR318-B3LZ Sander - 3 X 18 Low Profile Blt Sa
Black and Decker DS321 Sander Polisher - Sander
Black and Decker DS321-AR Sander - 10076
Black and Decker DS321-B2 Sander Polisher - Belt Sander
Black and Decker DS321-B2C Sander - 12142
Black and Decker DS321-B3 Sander Polisher - Belt Sander
DeWALT DS321-B3LZ Sander Polisher - 3 X 21 Belt Sander
Black and Decker DS321-BR Sander Polisher - Belt Sander
Black and Decker KS405-AR Jig Saw - 400w Single Speed Jig Saw
Black and Decker KS405-B2 Jig Saw - 400w Single Speed Jig Saw
Black and Decker KS405-B2C Jig Saw - 400w Single Speed Jig Saw
Black and Decker KS405-B3 Jig Saw - 400w Single Speed Jig Saw
Black and Decker KS405-B3LZ Jig Saw - 400w Single Speed Jig Saw
Black and Decker KS405-BR Jig Saw - 400w Single Speed Jig Saw
Black and Decker KS405SB-AR Jig Saw - 400w Jig Saw Plus Soft Ba
Black and Decker KS405SB-B2C Jig Saw - 400w Jig Saw Plus Soft Ba
Black and Decker KS405SB-B3 Jig Saw - 400w Jig Saw Plus Soft Ba
Black and Decker KS410-AR Jig Saw - Single Speed 410w Jig Saw