Genuine OEM replacement part, this item is sold individually. The 151553-00 Dust Seal/Brake is a dual propose part. It is a Dust Seal to help prevent dust and debris from entering the motor assembly. It also acts as a Brake to keep the sanding pad at lower RPM so the sander will work properly. It is a good idea to replace this part when you are replacing the sanding pad.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
runaway speed fixed.
arrived quickly, fixed problem, easy to replace.
Guest - September 29, 2019
Verified Purchase
★★★★★
★★★★★
As always, the right parts for the needed repairs.
I have been a customer of eReplacementParts for 5 or 6 years, have always been pleased and have recommended them to a number of my friends. The exploded views and the list of suggested parts for a particular problem with the appliance, tool, etc. are very helpful in finding the appropriate parts. Every time I need to find a part of any kind, the first place I check is eReplacementParts.
Guest - September 15, 2019
Verified Purchase
★★★★★
★★★★★
Dust seal
I got the part is looking for, the online schematic make it so easy to lookup parts
Guest - January 13, 2020
Verified Purchase
★★★★★
★★★★★
dewalt sander part
as of today, I have not received this item.
Marshall - March 22, 2021
Verified Purchase
★★★★★
★★★★★
OEM part at a great price.
It shipped quickly and I received it in less than a week. It made my sander work like new again at a very reasonable price.
Oren - August 23, 2021
Verified Purchase
★★★★★
★★★★★
Dust seal
Received the part very quickly .
Guest - August 24, 2021
Verified Purchase
★★★★★
★★★★★
Easy fix
Found the part for my sander and quick fix
Guest - September 10, 2022
Verified Purchase
★★★★★
★★★★★
Easy repair free sander works like new
I got this for a palm sander I got for free because it was spinning too fast and damaged wood if you weren’t careful perfect fix
Guest - March 10, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I removed three screws from the sanding pad, then removed the pad. The you can just take the dust seal/brake off with your hand and place the new one right back on. The just install the sanding pad back on with the three screws.
ò Remove sanding pad
ò Use torx bit ( I think a T20) to remove bearing assembly
ò Bearing is sandwiched between bearing retainer halves and requires you to lightly tap together with a small hammer.
ò Reverse to assemble
ò NOTE New screws are self tapping
Replacement parts site supplied the the list of parts needed to repair the malfunction of my sander, they also described the malfunction. It doesn\'t get any better.
Checked out problem, took sander apart, remove bad parts and install new parts after they arrived.
Did you find this story helpful?
Thank you for voting!
The dust bag was worn and I had taped the hole closed. The dust seal/brake and the metal wear seal on the inner side of the pad was well worn. I replaced each.
I removed the three screws holding the pad on. Removed the pad. Replaced the seal/brake, installed the new pad, replaced the screws. Done. The most challenging aspect was waiting for my wife to watch a genius (me) at work.
I didn\'t require any instructions for this very minor repair. I do have a working knowledge of repair and rep
... Read morelacement of parts on shop tools.
Removed the sanding pad by removing three small star bolts
Removed sanding dust from the bottom of the sander and pad
Pulled out the old plastic Dust Seal/Brake
Aligned and inserted the replacement Seal/Brake
Replaced the sanding pad with the three small star bolts
Tested the sander, worked like new!
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10166528
Manufacturer Part Number: 151553-00
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/sander-polisher/seals-and-gaskets/"},{"position":2,"name":"151553-00","title":"151553-00","url":""}]
