Remove the inlet hose from pump. Unscrew the plastic cover from the pump throat area to access pump pin. Use a screwdriver to carefully remove round spring holding pin in place, and drive pin out.
Use a screwdriver and hammer to loosen the locking ring holding pump to machine body. Now unscrew the pump from the housing. Simply rever
... Read morese the procedure to install the new one.
NOTE: Before you install the new pump, run the motor and observe the lowest point of the cam- mark with tape on the housing as a reference. You do not want to screw in new pump too far or the cam will bottom out on the top of the pump housing. screw the new pump in to about 1/4\" below that lowest point, that way you get the longest stroke with the pump. Made mine work better than new in my opinion...
Also- make sure the hose from the pump to the prime/spray valve, along with the valve openings in the filter housing, are clean, and not clogged or it will not build pressure. Takes just a few minutes but will save frustration.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 246428 Graco Pump")
_WW_1.gif "Part Location Diagram of 246428 Graco Pump")
