Made a cut, moved board and within 5 seconds tried to make another cut and saw wouldn\'t start. Thought lost power, nope, No noise or smell nor did I bind the saw. Figured the switch went but pulled and checked brushes anyway, good. Finished for the day. Next day brought in spare miter saw to finish job.
Pulled switch and checked w
... Read moreith multi-meter, showed good. Power was getting to light on saw, shorted switch wires, nope saw still dead. I don\'t know what\'s inside the soft start can, figured some kind of electronics. An armature or field winding usually but not always gives warning or a smell so discounted an open winding but was prepared to test if need be. Ordered a switch just in case, brushes since they are a consumable item and should have on hand anyway and the soft start can. The spade connectors on my saw are small and the spade studs on the soft start can that was sent are big so no fit. I had to file narrower the studs on the soft start to fit the saw connectors. Once connected and reassembled I tried the saw, all back to normal.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10157089
Manufacturer Part Number: JM23100179
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
