Part Location Diagram of 651284-9 Makita Switch Sgel 115cdy-6
See part 83 in the diagram
Replacing your Makita Sander Polisher Switch Sgel 115cdy-6
( Grid squares measure 1x1 inch )

Switch Sgel 115cdy-6 651284-9

Manufactured by:
Makita
ERP Number:
ERP10153603
Part Number:
651284-9
Original Equipment Manufacturer ?
$34.08
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an OEM replacement part used with Makita sanders/routers. This switch is what allows user to turn the unit on and off. It is plastic a plastic switch with metal terminals. Over time mechanical moving components of a switch will begin to fail requiring a replacement. Please note this item is sold individually. To complete this repair you will need a screwdriver. • Remove housing • Disconnect wires • Remove old switch • Install new switch • Re-attach wires • Reassemble and test the unit

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Makita
This part works with the following products:
  • Sander Polisher

Videos For installing this part.

?
Replacing your Switch Sgel 115cdy-6

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bad switch

jacob from capitol heights, Maryland

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
651284-9
Take off the cover switch unplug 2 wire in the switch and put back the new one really easy
Did you find this story helpful?
Thank you for voting!

Trigger switch failure on saw. powered up when plugged in.

Timothy from Indianapolis, Indiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
651284-9
Removed several screws from the handle on the saw with a phillips screwdriver, removed and replaced switch. Re-assembled in reverse and done in about 15 minutes.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10153603
Manufacturer Part Number: 651284-9
Brand Model Number Description
Makita 2107F Band Saw - Portable Band Saw
Makita 2107FK Band Saw - Portable Band Saw
Makita 9403 Sander Polisher - Belt Sander
Makita 9404 Sander Polisher - Belt Sander
Makita 9902 Sander Polisher - Belt Sander
Makita 9903 Sander Polisher - Belt Sander
Makita 9920 Sander Polisher - Belt Sander
Makita 9921 Sander Polisher - Belt Sander
Makita JN3201 Nibbler & Shears - Nibbler
Makita JS3201 Nibbler & Shears - Shear
Makita RD1100 Router - Router
Makita RD1101 Router - Router