This is a genuine manufacturer-sourced part that is specially made for Makita drills. It is an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the exact location and application of this part. Keep in mind this high-quality spiral bevel gear is made of durable metal and is sold individually. Some older Makita DA3000R drills have used different gears which have been discontinued. NOTE: This 24-tooth spiral bevel gear (Fig #19) must correspond to a 7-tooth spiral bevel gear (Fig #4) in order to operate properly. If the corresponding gear in your drill does not have 7 teeth, you must also purchase a new corresponding gear. The 7-tooth corresponding gear (fig #4) can be purchased online <a href="http://www.ereplacementparts.com/spiral-bevel-gear-tooth-p-11047.html">#226751-9 Spiral Bevel Gear (7 Tooth)</a> .
Troubleshooting
This part works with the following brands:
Makita
This part works with the following products:
Electric Drill
Part# 226752-7 replaces these:
221343-9,
★
Customer Part Reviews
?
3.3
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 star
1
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Spiral gear 24
Good item good quality need keyway A+++++
Guest - August 8, 2019
Verified Purchase
★★★★★
★★★★★
new design gear fits, changes to press fit
This part, along with matching pinion, was used to repair old-style angle drill. The combination fits well and offers thicker/stronger teeth than original. The pinion is a direct fit replacement. This gear changes the original pin drive to press fit. The bore is 0.002" smaller than the original gear, requiring more push to drive home. (and the pin is not used.) No-load test run after reassembly ran smooth so I am happy to have my beloved drill back in business.
Hugh - September 23, 2020
Verified Purchase
★★★★★
★★★★★
No idea what They're selling
Parts come in with missing operations and they have no idea
Guest - January 14, 2020
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
30 - 60 mins
(1 rated repair)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Used bearing splitter and hydraulic press to press off bearings of pinion shaft and main chuck shaft. Used bearing splitter to remove bevel gear off of main chuck shaft. Do reverse process to assemble components, \"Note\" no keyway on new bevel gear so press fit only, still took about 2 tons pressure to install so will have plenty of hold
... Read more power. Put bearings back on pinion shaft, lube both gears and assemble gears in case.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10142780
Manufacturer Part Number: 226752-7
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
