Install
videos!

10141376-1-M-Makita-193822-6-Drill Chuck S13

( Grid squares measure 1x1 inch )

10141376-1-S-Makita-193822-6-Drill Chuck S13

Replacing your Makita Hammer Drill Drill Chuck S13

Drill Chuck S13 193822-6

Manufactured by:: Makita
ERP Number:: ERP10141376
Part Number:: 193822-6

$74.66

A Bit Difficult

30 - 60 mins

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Enter your model number

Jump to:

Description Troubleshooting Repair Videos Repair Instructions Model Cross Reference

Product Description

This is a genuine Makita replacement part. The drill chuck is designed by the manufacturer for use in hammer drills and speed drills. This part is made of metal, and comes with a metal chuck key. It is placed in the nose of the drill to hold the drill bit. You will require a screwdriver when replacing this item, and you may wish to watch our video on How to Remove a Drill Chuck.

Troubleshooting

This part works with the following brands:

Makita

This part works with the following products:

Hammer Drill

Part# 193822-6 replaces these:

192552-6,

Videos For installing this part.

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult

30 - 60 mins

(2 rated repairs) ?

< Prev
1
Next >

Sort by:

The drill chuck was hard to opening

Cavin from Miami, Florida

1 person found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers
Parts Used:: CA146086, 193822-6

I happened on your you tube video regarding this type repair. Very helpful
https://www.youtube.com/watch?v=usC8unA5RiA

Did you find this story helpful?

Chuck was broken no longer would open or close

Sidney from Sumner, Maine

0 of 1 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers, Wrench set
Parts Used:: 193822-6

Center screw would not loosen had to drill head off. didn\'t drill far enough was afraid I would ruin shaft of drill. Screw broke off in end of shaft when I tried to unscrew chuck. Removed broken screw with a small chisel and a hammer. when I looked at the parts I had removed I could have drilled a lot deeper without ruining anything. Wha ... Read more

Read less

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP10141376
Manufacturer Part Number: 193822-6

Brand	Model Number	Description
Makita	DP4010	Electric Drill - 1/2&#34 2-Speed Drill
Makita	HP1300S	Drill - Drill
Makita	HP2030	Hammer Drill - Hammer Drill
Makita	HP2032	Hammer Drill - Hammer Drill
Makita	HP2050	Hammer Drill - 3/4 Inch Hammer Drill
Makita	HP2050F	Hammer Drill - 3/4" Hammer Drill
Makita	HP2070F	Hammer Drill - Hammer Drill