Remove the handle halves, Remove the cord clamp. Take a picture of the internal parts and where they go. Remove the bottom cap. Then remove the screws from the motor housing. Tap on the housing with a rubber mallet to remove it. The field should come out with the motor housing.Then remove the rubber sleeve, magnetic disc, and the bearing.
... Read more( I used a bearing puller to remove the bearing). Then remove the seal and replace it with the new one. Check all the other parts for wear and tear. Put the tool back together in the reverse order that you tore it down. Good luck1
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10132287
Manufacturer Part Number: 45-06-0020
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/demolition-hammer/seals-and-gaskets/"},{"position":2,"name":"45-06-0020","title":"45-06-0020","url":""}]
_WW_1.gif "Part Location Diagram of 45-06-0020 Milwaukee Dust Seal Svc 5426-21")
_WW_1.gif "Part Location Diagram of 45-06-0020 Milwaukee Dust Seal Svc 5426-21")
