This is an OEM Approved replacement part designed for Milwaukee Power Tools. This item is Sold Individually. Due to the use or other factors a cord can crack or get damaged otherwise. It is important to replace a damaged cord before continuing to use your equipment. It is made out of Rubber and Metal. This cord comes together with Protector/Grommet.
Took the handle apart disconnected the wires from the switch and had to
separate the wires from the terminals, which was the hardest.
I should have ordered new terminals and the repair would
have been easier, and taken less time.
Then attached the new cord to the switch and attached the handle.
1. Removed 1/2 of the handle
2. Used small flat head to disconnect exiting cord from trigger
3. Removed ground wire
4. Installed new cord protector and cord
5, Connected cord to trigger and connected ground
6. Re-installed handle Test ran Saw
Remove the screws from the switch handle
Remove the cord clamp
Remove the wires from the switch and the ground wire
Connect the cord wires to the switch and screw in the ground wire
Screw in the cord clamp
Install the handle
Removed the handle and separated it
Removed the cord clamp
Removed the wires from the switch and the ground wire
Took the cord protector from the old cord to the new cord
Connected the new cord wires to the switch and the ground
Replaced the handles
Removed the old tires from the pulleys
Stretche
... Read mored the new tires onto the pulleys
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10122791
Manufacturer Part Number: 22-64-2000
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 22-64-2000 Milwaukee Power Cord (18-foot)")
_WW_1.gif "Part Location Diagram of 22-64-2000 Milwaukee Power Cord (18-foot)")
