This is an authentic Milwaukee replacement part. The field is designed by the manufacturer for use in hammer drills and jig saws. This part is made of metal, and is used in conjunction with the armature assembly to provide power to the machine. You may require a screwdriver or Allen wrench when replacing this part. This item is sold individually.
Troubleshooting
This part works with the following brands:
Milwaukee
This part works with the following products:
Jig Saw
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the black rubber piece at back of the drill which provided access to one of the screws. I used a small screwdriver to pry the black rubber piece loose.
2 Removed all the screws from the side of the drill and from the front.
3. Separated the red parts of the drill then the black front of the drill removing the armatu
... Read morere from the field.
4. Removed the wires from the field then removed and replaced the field.
5. Installed the front black portion of the drill, installing the armature in the field.
6. Installed all screws in the red part of the drill and tightened them.
7. Separated the two front black portions and pulled clip from the shift lever.
8. Removed cracked shift lever and installed new one, reinstalling the clip.
9. Installed the black portion back on the drill but it wouldn\'t go all the way back on. I checked and found a pin on one of the gears had fallen out. I reinstalled it and while holding the front black portion up (with drill chuck down) and then installing the drill onto the front black portion. This prevented the pin from falling out again.
10. Installed the screws on front of the drill and tightened.
The drill now has all the power it had originally and the shift lever dose not fall out anymore.
Disassembled drill, removed field wires.
Mark all wires to where they connect.
Remove field assembly.
Install new field assembly.
Connect wires and assemble drill.
Test.
When pulling front part of drill out with the armature, make sure you keep the front half\'s together as one assembly. Or you will hav
... Read moree gears and spacers falling out.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10121743
Manufacturer Part Number: 18-07-0150
Jig Saw
- 6276-21 (Serial 890a) Orbital Jig Saw Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 18-07-0150 Milwaukee Field")
_WW_1.gif "Part Location Diagram of 18-07-0150 Milwaukee Field")
