All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
1- 2 hours
(1 rated repair)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Drill worked intermittently in \'2\' speed. Notice that \'1\' worked fine, and switching from \'1\' back to \'2\' would solve the problem for a minute or two. Noticed nasty gear sounds when failed.
1. Unplugged the battery
2. Removed the chuck screw (inside the front of the chuck)
3. Removed the Allen screws in the drill side and around the chuck.
4. Removed the clip near the battery holding the two halves together.
5. Gently pried apart the case while pulling forward on the chuck.
6. Gingerly removed i
... Read morenternal electronics (watch for selector switch, it tends to drop out and will only go back in one way.
7. Detailss go a little fuzzy at this point, but you end up having to take the drill motor off of the back, twist and then unscrewing the plastic face plate screwed to it, and swapping that to the new gearcase.
8. Pull the drill chuck off of the front of the old gearcase and lightly screw it to the new case. (Tighten it completely after assembly is done.)
9. Reassemble the rest of the parts and case.
1. Be careful holding the drive selector switch while putting the case back together (took me quite a few times to get it aligned and over the switch \'nub\'. Also keep an eye on the LED diffuser, it doesn\'t go in easy.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10120507
Manufacturer Part Number: 14-30-1000
Cordless Drill
- Cordless 12 Volt 3/8" Driver Drill
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/parts/power-tool/cordless-drill/transmissions-and-clutches/"},{"position":2,"name":"14-30-1000","title":"14-30-1000","url":""}]
_WW_1.gif "Part Location Diagram of 14-30-1000 Milwaukee Gearcase Assembly")
_WW_1.gif "Part Location Diagram of 14-30-1000 Milwaukee Gearcase Assembly")
