1. Removed 2 Allen head screws, old plastic skid and lock nut, spring, washers, old fence.
2. Reassembled in reverse sequence starting with new fence .
Old fence had bent very slightly and slipped out of seat. Would not cut square. Cuts square with new fence. Be sure nut is tight enough to hold square and firm, but d
... Read moreo not over tighten. Probably over tightening had unseated original fence.
Read less
Did you find this story helpful?
Thank you for voting!
my error. fence was sitting on chop saw. I cut through a piece of wood and 3/4 way through the fence. It cut the rod also.
1. Removed the old cut rod and its parts from the old fence.
2. Removed the lock nut, washers, spring and end cam from the old rod.
3. Installed good parts from the old rod to the new one.
4. Positioned the new rod through the fence.
5. Installed the lock nut on the end of the new rod.
( Before disasse
... Read morembly of the old rod from the fence, pay attention the rod position near the handle end.)
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10077409
Manufacturer Part Number: 089037011033
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
