This brake is a genuine Ryobi replacement part. It is commonly used in random orbit sanders. It is made of rubber and sold individually. A screwdriver is needed for replacement. To replace this part: 1. Remove the backing pad by removing the four screws. 2. Remove the top cap by extracting the retaining screws. 3. Remove the switch trigger by lifting it out of the unit. 4. Remove the retaining screws from the motor housing. Then separate the two halves and top of the housing with a screwdriver. 5. Remove the old break pad from the unit and replace it with the new pad by aligning the tabs with the grooves. 6. Reassemble the unit.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
easy replacement
The old rubber part was literally falling apart . new one was delivered in a timely manner and saved me from buying a new sander. The manufacturer didn't even have the part in stock.
Guest - April 23, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair works get and my sander is back to working again
The part was new great condition but still waiting for my chip clip to arrive it's been about 3months that I ordered it still haven't heard a word or gotten an email from you all on that part please look into it let me know what is going on thank you for this that I did get tony e
Guest - July 24, 2020
Verified Purchase
★★★★★
★★★★★
Easy Repaire
Part was easy to fix after the pad broke, resulting in the brake cracking.
Guest - October 24, 2020
Verified Purchase
★★★★★
★★★★★
Very easy repair. Took about 20 mins and that only because I had one stubborn screw taking the old part off.
These are my go to folks for parts. They always have what I need to repair my equipment. Every item I have purchased has always been great quality and has always fit perfectly.
Ron - December 22, 2020
Verified Purchase
★★★★★
★★★★★
easy repair
learned what part of the sander was. definitely a lot cheaper than buying a new one!
Guest - April 20, 2021
Verified Purchase
★★★★★
★★★★★
Guest - April 27, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair
Arrived as scheduled. Installation was easy. Thanks.
Guest - August 19, 2021
Verified Purchase
★★★★★
★★★★★
The exact part required
This, and every part I have ordered and received from eReplacment Parts, was shipped quickly and was precisely what I ordered and needed.
Guest - November 19, 2021
Verified Purchase
★★★★★
★★★★★
Perfect Fit
The parts were the perfect fit for my grinder. The instructions online were great, especially for someone whose never repaired a tool before. Ordering was a breeze! The follow up was greatly appreciated- my new “go to” spot for parts and repairs.
Guest - November 30, 2021
Verified Purchase
★★★★★
★★★★★
Easy fix
Worked great , like original
Guest - May 20, 2022
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
This was a very easy repair to replace worn-out parts. All that it involved was removing 4 screws to take the hook and loop backing pad off and twisting the old brake off from the slots. Installed the new brake and hook and loop pad in approximately 20 minutes if even that.
Did you find this story helpful?
Thank you for voting!
The hook pad disintegrate And the rubber guard around it.
1.You must separate the sander case. comes apart in 2 pieces in half.
2. In order to take the case apart you have to remove about 10 screws.
3. Insert replacement parts.
4. Re-screw case back together average 30 minutes .
Take the four screws out of the old pad and take it off. Then take off the old brake and put the new one on. Then put on the new pad using the four screws.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/parts/power-tool/sander-polisher/transmissions-and-clutches/"},{"position":2,"name":"030157001017","title":"030157001017","url":""}]
