Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Up loader tube
Great condition didnt fit for my part but that was my fault i was just hoping . but the shipping was very fast and the part is very sturdy wish it did fit
Guest - October 22, 2019
Verified Purchase
★★★★★
★★★★★
Right part to fix the problem
The eRP website helped me locate the right part, then shipped it quickly. That allowed us to get our unit back into use.
George - July 21, 2020
Verified Purchase
★★★★★
★★★★★
Quick shipping but tube too long
The tube was an inch too long on one end and half an inch too long on the other. After cutting it down to the correct size, it fit fine.
Guest - May 6, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove compression nut on both ends of the tube. Discard old ferrules, new ones are included with the new tube. Install compression nuts then ferrules and each end of the new tube. Tighten compression nuts. Do not over tighten.
Did you find this story helpful?
Thank you for voting!
Given air compressor that was broken found brass air tube cracked
Changed out all parts ordered and updated other pieces. A busted air compressor worth over $200 given to me because it would not hold air, is now operating and perfect after receiving parts. Awesome!
Did you find this story helpful?
Thank you for voting!
Copper tubing was cracked due to extreme vibration. Compressor is 12 years old.
Loosen motor bracket and nuts holding tube in place. Retain nuts for reuse. Measure and cut tubing being very careful not to cut too short. I made several (4) cuts for a perfect fit. Install nuts and compression rings on tube ends and tighten nuts to compressor evenly and tighten. Re-install motor strap and check for leaks.
Removed the cooper tubing from pump to valve. Rubber ferrules badly damaged and tubing was crushed. I just had to cut the cooper tubing supplied in the kit, put on the ferrules and compression nuts and that was it.
Disassembled compressor head laid out old parts in sequential order and assembled in reverse order removing old gaskets and putting new ones in place.
Replaced the tube assembly with some cutting using a tubing cutter to get proper height and length and using adjustable wrench tighten tube nuts with Ferrels to tank and compressor he
... Read moread.
Closed drain valve and hooked up hose with air tool and plugged in to gfci receptacle and let it build up pressure 125 psi to cut off used air tool to drop pressure and let it run until it got to its high limit 125 psi before it cut off again and this time I let compressor sit for 30 minutes and no noticeable drop in air pressure.
I am thoroughly Pleased with the parts and the ease of repair.
It sure beats putting out another $150-$200 for another compressor.
Part came with very good instructions. Repair went just as they said. Was impressed with the speed of delivery. Your magnet is on my refrigerator for next time.
I Removed the old tube from compressor.
Marked new tube for correct length.
Cut new tube with saw. Cleaned up the end with file. Inside and outside of tube.
Replaced new rubber seals on each end of the tube. Tightened down evenly.
Then went to work. =ƒÿÇ
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
