Part Location Diagram of 900110 Echo Throttle Swivel Kit
See part G-16 in the diagram
Replacing your Echo Leaf Blower / Vacuum Throttle Swivel Kit
( Grid squares measure 1x1 inch )

Throttle Swivel Kit 900110

Manufactured by:
Echo
ERP Number:
ERP10021652
Part Number:
900110
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(16 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This item is an authentic Echo replacement part that has been sourced from the original manufacturer to be used with blower/vacuums. The swivel kit connects the carburetor to the throttle rod. This item is used to actuate the rotor cover to adjust the amount of air/fuel that enters the engine and changes the output. The throttle swivel kit is priced as a single item.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Leaf Blower / Vacuum
  • Chipper Shredder

Videos For installing this part.

?
Replacing your Throttle Swivel Kit

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(16 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Throttle cable broke

ron from smyrna, Georgia

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
900110
1. Removed air cleaner 2 screws
2. Replaced cable
3. Put it back the 2 screws
4. Replaced air filter cover
Did you find this story helpful?
Thank you for voting!

Throttle wire broke

David from BLAKELY, Georgia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
900110
1. Removed filter cover and filter then removed carburetor then what was left of throttle wire and repeated process in reverse
Did you find this story helpful?
Thank you for voting!

My ECHO blower won\'t start

Celso from Cedar Park , Texas

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
900110, C454000480
I have upgraded the carburetor from my old echo blower. The old type carburetor stops working and I\'ve been replacing it couple of times but to no avail. Same problem all the time- won\'t start after sometime. So, I decided to change the carburetor (cheaper than the original Walbro) but it needs some modification. Fortunately, I found t his rod and throttle swivel kit in ereplacements parts. Upon receiving the parts, I cut some piece from cover of my blower to mount the new type of carburetor. Up to this writing, my blower runs like a new and I can go the full throttle again!
Did you find this story helpful?
Thank you for voting!

Blower throttle cable broke

Mike from Greenbay , Wisconsin

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
900110
Routed cable through throttle linkage and attached to carb. Took less than 5 minutes.
Did you find this story helpful?
Thank you for voting!

Broke cable

Jim from Houston, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
900110
Throttle cable broke; removed the old one, put in the new one just like the old one was in. No problem!
Did you find this story helpful?
Thank you for voting!

Cable on my blower broke

Mauricio from SAN ANTONIO, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
900110
Cable broke order a new cable and it was easy to fix
Did you find this story helpful?
Thank you for voting!

Missing parts

Mark from SANTA FE, New Mexico

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Installed throttle swivel kit, air filter and it started with no problem.
Did you find this story helpful?
Thank you for voting!

Throttle cable and broke off which connects cable to trigger

James from MARLBOROUGH, Massachusetts

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
900110
Removed cover, broken cable and connected new cable. Checked operation of trigger. Replaced cover and started blower. Success!!!! Small engine repair shop estimate to repair $125.00, my cost to repair $11.00 with shipping.
Did you find this story helpful?
Thank you for voting!

Blower throttle cable broke

LESLIE from DAPHNE, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
900110
1. Removed mounting screw.,
2. Removed the carburetor.
3. Replaced new cable making sure its aligned.
4. Replaced carburetor and mounting screw.
Did you find this story helpful?
Thank you for voting!

Throttle cable broke

Michael from Mayflower, Arkansas

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
900110
The cable was broke when I took the blower apart, so I didn\'t know the routing of the replacement cable. I ended up going to a YouTube video that explained it nicely.
The part itself was very inexpensive and was delivered fast. I will definitely use eReplacementParts again!
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP10021652
Manufacturer Part Number: 900110
Brand Model Number Description
Echo ES-250 Chipper Shredder - 25.4 cc Shred 'N' Vac
Echo ES-252 Chipper Shredder - Echo Shred N Vac Shredder/Vacuum
Echo PB-250 Leaf Blower / Vacuum - 25.4cc Handheld Blower
Echo PB-250LN Leaf Blower / Vacuum - 25.4 cc Handheld Blower
Echo PB-251 Leaf Blower / Vacuum - Handheld
Echo PB-252 Leaf Blower / Vacuum - Handheld Blower
Echo PB-255 Leaf Blower / Vacuum - Handheld
Echo PB-255LN Leaf Blower / Vacuum - 25.4 cc Handheld Blower