This is an OEM sourced replacement part used with a variety of lawn and garden equipment. A spark plug delivers electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You should gap your spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a socket wrench to install the spark plug.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Worked good
Ordered multiple parts for my old Lawn Boy snow blower. All parts arrived in a good time and all in one package. Loved the website. Had great illustrations and easy to pick out parts I needed. Will definitely use them again for my other equipment.
Guest - September 12, 2019
Verified Purchase
★★★★★
★★★★★
great part , no problem
the best part is , original , nice
Guest - January 14, 2020
Verified Purchase
★★★★★
★★★★★
Great part, pick up was fast and easy
Great
Guest - May 14, 2023
Verified Purchase
★★★★★
★★★★★
spark plug and filter Toro mower
Installed and mower works like new again!
Guest - October 7, 2019
Verified Purchase
★★★★★
★★★★★
Not recieved
Its been over 2 weeks haven't recieved it.
Guest - June 24, 2019
Verified Purchase
June 24, 2019
Hello William, thank you for your review. We have emailed you in regards to this order. We look forward to hearing from you!
★★★★★
★★★★★
Paid for two business day shipping - parts did not arrive until FOUR business days.
I would like to be reimbursed for the extra shipping fees I paid of parts to arrive within two business days - but did not arrive until Four business days.
I am not satisfied with shipment.
Guest - September 3, 2019
Verified Purchase
September 3, 2019
Hello Peter,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Placed the mower on the work bench
Remove the blade bolt and blade support and blade
Removed the old belt and installed the new one
Installed the new blade with the blade support and blade bolt
Removed the air cleaner cover and cleaned it
Removed the old air filter and installed it and the cover
Removed
... Read more the old spark plug and gapped the new one at 0.030 and installed it
Removed air cleaner cover , then removed the old air filter and replace it with the new one.
Removed the spark plug and replace it with a new one and gapped it a 0.030
Replace the spark plug, gapped the new one at 0.030
Remove the air filter cover, remove the old filter and install the new one, replace the cover
Remove the blade bolt and the blade support, then the blade
Install the new blade in reverse order
I removed the 2 bolts in front of the cover to be able to access the top bolts to the head gasket, then removed the heat shield from the muffler to access another blocked bolt, then the spark plug and remaining bolts. Cleaned the head with a steel brush. Cleaned it all up and put it all back together w the new gasket. Started up after a
... Read more few pulls and ran stronger than ever.
Replaced starter recoil
Replaced spark plug
Replaced air filter
Cleaned carb
Changed oil
Replaced oil fill tube and dipstick and used new gaskets
It was not a difficult job. Any DIY person could figure it out fairly easily. All the parts are easy to get to and not too complicated to remove or rep
... Read morelace.
I removed the spark plug and keep it connected and pulled on the rope to see if I could see any spark. No spark and it was a new spark plug. Replaced magneto. Started on second pull. Took around 15 minutes to remove and replace all the screws.
Went ahead and replaced Carburetor and air filter.
1. removed the old spark plug
2. removed the old carburetor
3.replaced and installed the new carburetor
4. Installed the new spark plug
5. put fresh gas in the engine.
6. one pull and it started like it was brand new.
Pulled the carburetor off and rebuilt it. The idle jet was completely clogged. You\'ll need a very small diameter wire to clean it. I used a strand of copper wire. Reassembled and runs like new. Check for videos on how to do it. Very simple if you have ever turned a wrench.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9277103
Manufacturer Part Number: 35395
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(1986)_WW_4.gif "Part Location Diagram of 35395 Tecumseh Spark Plug")
(1986)_WW_4.gif "Part Location Diagram of 35395 Tecumseh Spark Plug")
