Part Location Diagram of 207-62345-08 Subaru Insert Washer
See part F-210-17 in the diagram
( Grid squares measure 1x1 inch )

Insert Washer 207-62345-08

Manufactured by:
Subaru
ERP Number:
ERP9919678
Part Number:
207-62345-08
Original Equipment Manufacturer ?
  Works with your model  EY080DD4110!
$5.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   EY080DD4110!

Product Description

?

This manufacturer sourced replacement part is designed for use with Subaru / Robin engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly between connected parts. This is a standard hardware which has multiple applications, for the correct location and application please refer to the appropriate diagrams of your model. Keep in mind this high-quality part is made of durable material and is sold individually.

Troubleshooting

This part works with the following brands:
  • Subaru
This part works with the following products:
  • Engine

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Generator had been left for gas to gel and clog carb

Stephen from Millsboro, Delaware

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Subaru, small two cycle engine Carburetor repair.
Remove gas line from carburetor and drain fuel tank
Remove carburetor linkage from carburetor
Remove air filter housing
When you remove the two interior bolts from the air filter the carburetor will also be loose
Remove air cleaner and carburetor
Disse mble Carburetor and spray parts with carburetor cleaner
Don\'t try to do a full soak in carb cleaner the carb is simple it just needs a flush
check all passages, use new gaskets, rope packing for the bowl and replace jets
Reassemble and Va room, thanks eReplacement parts, easy to read parts catalog and fast shipping.
Stephen K.
Did you find this story helpful?
Thank you for voting!
  • 1