Genuine Honda replacement part, this part is sold individually. The Insulator- Carburetor acts as a insulator to keep heat from transferring from the engine to the carburetor, which could cause damage to the carburetor.
Removed old carburetor and replaced with new one. Lawn mower runs great now and engine does not surge anymore. Took a look at a YouTube video on cleaning the carburetor for reference. Pretty easy to do even if you do not know much about small engines.
I found your video on you tube on how to replace a Honda carburetor. And it gave me enough information on the repair I had to do. Here is a copy of the link. I hope this will help others.
https://www.youtube.com/watch?v=D32zXNYSxmw
I watched the you tube video on replacing a Honda carburetor. After I watch it, I was able to replace all of the other parts that I had ordered. Here is a copy of the video that was so helpful to me. Enjoy. https://www.youtube.com/watch?v=D32zXNYSxmw
Did you find this story helpful?
Thank you for voting!
Engine submerged under water from hurricane. Water in oil.
Drain water from fuel and oil system. Remove all items to access and remove carburetor. Replace with new carburetor, gaskets, hoses etc.
Flush oil system with mineral spirits or other solvent. Compressed air to flush out fumes . May have to change oil 4x before oil starts to loose \"milky\" appearance.
Our Honda mower had been dormant for 2-3 years and would only run with the choke 3/4 on. Having encountered this problem in the past with other equipment I ordered a new carburetor and related gaskets from ereplacementparts.com, installed them and it now runs as it should. Have found that trying to clean small engine carburetors is a wast
... Read moree of time and money in most cases. This was a fairly simple job, however anyone contemplating this should look at their engine schematic and make sure you order the accompanying gaskets etc so you don\'t get it apart and have to wait for overlooked items to get it back together. ereplacement parts.com provided OEM Honda parts and delivered them quite quickly. Dave B.
Read less
Did you find this story helpful?
Thank you for voting!
Changed carburetor on a Honda motor for a pressure washer
1. Removed air filter,
2. Removed fuel line.
3. Removed throttle and choke linkages and springs.
4. Removed carburetor.
5. Installed fuel line, linkages and springs, new carburetor and air filter.
6. Started motor which ran smoothly.
Did you find this story helpful?
Thank you for voting!
Xc2600 pressure washer would not start; had sat with gas in it
Tried cleaning original gummed-up carb. Still wouldn\'t start.
Ordered/installed replacement carb and gaskets for the Honda engine.
Started up after a few pulls. Just washed down front bricks. Worked fine!
Tip: printed off copies of the parts diagrams to help with getting all the parts re-installed.
Replaced all gaskets and seals on the carburetor, making sure all ports, even the smallest were clear. Very important to pay attention to gasket orientation as all the small holes are required to align. Reassembly is difficult as there are almost a dozen pieces that need to be aligned simultaneously.
Did you find this story helpful?
Thank you for voting!
Would only run with the Choke. Air Guide Gasket Eroded. Running Lean.
Removed (2) 10 mm bolts fastening Air Cleaner Housing, Carb, Carb Insulator and Gaskets to Engine Block. Scraped remaining Gasket from Intake Port and reassembled with New Parts. Runs Like Brand New.
Remove air cleaner cover and remove the old air cleaner and replace with new one, replace air cleaner cover. Remove the muffler, Then simply replace the other the parts in the order that you removed them Then install the muffler. Done.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9899046
Manufacturer Part Number: 16211-ZL8-000
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2009)_WW_3.gif "Part Location Diagram of 16211-ZL8-000 Honda Carburetor Insulator")
(2009)_WW_3.gif "Part Location Diagram of 16211-ZL8-000 Honda Carburetor Insulator")
