Part Location Diagram of 14410-Z1C-000 Honda Rod- Push
See part B-4 in the diagram
( Grid squares measure 1x1 inch )

Rod- Push 14410-Z1C-000

Manufactured by:
Honda
ERP Number:
ERP9893015
Part Number:
14410-Z1C-000
Original Equipment Manufacturer ?
  Works with your model  EM7000IS!
$10.31
Special Order

Easy 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   EM7000IS!

Troubleshooting

This part works with the following brands:
  • Honda
This part works with the following products:
  • Engine
  • Generator
  • Snow Blower

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Stuck intake valve bent push rods and broke rocker arm. I had already pulled the head and removed the valve and cleaned the valve and valve guide while I was waiting for the parts to arrive.

Victor from San Antonio , Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
Removed the fuel tank, starter rope assembly, removed the air shroud, removed the air filter assembly, removed carburetor, removed exhaust system, removed valve cover, removed rocker arm and push rods, removed cylinder head, removed valve from head and cleaned valve and guide, reassembled in opposite order, torqued all bolts and waited f or parts to arrive. Time spent around two hours. After parts arrived I installed the remaining push rod and rocker arm, set valve clearance and installed the valve cover. Engine started on the second pull of the starter rope.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9893015
Manufacturer Part Number: 14410-Z1C-000
Brand Model Number Description
Honda EB3800X Generator - Generator
Honda EB4000X Generator - Generator
Honda EB5000I Generator - Generator
Honda EB5000XK2 Generator - Generator
Honda EB5000XK3 Generator - Generator
Honda EB6500X Generator - Generator
Honda EB6500X1 Generator - Generator
Honda EB6500XAT Generator - Honda Generator Model EB6500XAT Parts
Honda EB7000I Generator - Generator
Honda EG5000CL Generator - Generator
Honda EG6500CL Generator - Generator
Honda EM3800SX Generator - Generator
Honda EM4000SX Generator - Generator
Honda EM5000IS Generator - Generator
Honda EM5000IS1 Generator - Generator
Honda EM5000SXK2 Generator - Generator
Honda EM5000SXK3 Generator - Generator
Honda EM6500SXK1 Generator - Generator
Honda EM6500SXK1AT Generator - Honda Generator Model EM6500SXK1AT Parts
Honda EM6500SXK2 Generator - Generator
Honda EM7000IS Generator - Generator
Honda EU6500IS Generator - Generator
Honda EU6500IS1 Generator - Generator
Honda EU6500IS1AT Generator - Generator
Honda EU7000ISN Generator - Generator
Honda GX340RT1 Engine - Small Engine
Honda GX340RT2 Engine - Engine
Honda GX340RT2X Engine - Gx340rt2x Vwc Gcbet-2000001-9999999
Honda GX340UT1 Engine - Small Engine
Honda GX340UT2 Engine - Gx340ut2 Qae2 Gcbet-1000001-1999999