Part Location Diagram of 692076 Briggs and Stratton Spark Plug Boot
See part B-635 in the diagram
Replacing your Briggs and Stratton Engine Spark Plug Boot
( Grid squares measure 1x1 inch )

Spark Plug Boot 692076

Manufactured by:
Briggs and Stratton
ERP Number:
ERP9066121
Part Number:
692076
Original Equipment Manufacturer ?
  Works with your model  121300!
On Order

Easy 

15 - 30 mins 

(4 rated repairs) ?
  Works with your model   121300!

Product Description

?

This replacement spark plug boot is an authentic component which is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This rubber cap is used to connect the spark plug to the magneto, over time rubber material can dry out and crack eventually requiring a replacement. Please note this high-quality part is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Cub Cadet
  • Simplicity
  • MTD
  • Toro
  • Poulan
  • Husqvarna
  • Craftsman
  • Ariens
This part works with the following products:
  • Engine
  • Lawn Mower
  • Chipper Shredder
  • Leaf Blower / Vacuum
  • Tiller

Videos For installing this part.

?
Replacing your Spark Plug Boot

Customer Part Reviews

?
4.7
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Lawn Mower runs but eventually has knocking sounds and shuts off

Joseph from Pelham, New York

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
84005272, 692051, 692076, 692390
1. Added new fresh oil correct 15OZ amount.
2. Replaced Spark plug.
3. Replaced Air Foam Filter.
4. Replaced carburator.
5. Replaced Armature Magneto.
6. Replaced Wire Stop.
Did you find this story helpful?
Thank you for voting!

two cylinder engine runs rough

Norman from Mobile, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
692076
Observed running engine, and noticed spark coming out of one boot. Looked further and found that spark plug clip was rotated 90 degrees in boot and could not clip on plug. Don\'t use that repairman any more. But new boots on both plug wires. Rough idle is gone.
Did you find this story helpful?
Thank you for voting!

Lawn mower would not start - no spark from spark plug

Thomas from Indianapolis, Indiana

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
692076, 590454
1. Removed plastic motor cover, plastic fuel tank, and air filter housing
2. Removed oil dipstick holder, metal motor cover, and spark plug
3. Removed old magneto coil
4. Installed new magneto coil using printer paper to space from flywheel
5. Reattached new spark plug boot, metal motor cover, and oil dipstick hold er
6. Tested magneto for good spark
7. Reinstalled air filter housing, plastic fuel tank, and plastic motor cover
Did you find this story helpful?
Thank you for voting!

Plug wire clip got twisted in boot and did not snap onto plug, causing spark to go thru boot and ground to engine.

Norman from Mobile, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
692076
Took off old boot , installed new and oriented clip to snap on plug. Did both boots as engine is 8 years old. Immediate improvement.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9066121
Manufacturer Part Number: 692076
Brand Model Number Description
Briggs and Stratton 01191-0 Generator - Briggs & Stratton Generator Model 01191-0 (011910, 01191 0) Parts
Briggs and Stratton 01211-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01211-0 (012110, 01211 0) Parts
Toro 08703 Lawn Mower - Toro Lawn Mower Model 08703/SERIAL: 313000001-313999999 (08703/SERIAL:313000001313999999, 08703/SERIAL: 313000001 313999999) Parts
Toro 08705 Lawn Mower - Toro Lawn Mower Model 08705/SERIAL: 313000001-313999999 (08705/SERIAL:313000001313999999, 08705/SERIAL: 313000001 313999999) Parts
Briggs and Stratton 08P502 Engine - Briggs & Stratton Small Engine Model 08P502/0029-H1 (08P502/0029H1, 08P502/0029 H1) Parts
Briggs and Stratton 08P502-0002-H1 Engine - Engine
Briggs and Stratton 08P502-0003-H1 Engine - Engine
Briggs and Stratton 08P502-0004-H1 Engine - Engine
Briggs and Stratton 08P502-0005-H1 Engine - Engine
Briggs and Stratton 08P502-0005-H5 Engine - Engine
Briggs and Stratton 08P502-0006-H1 Engine - Engine
Briggs and Stratton 08P502-0007-H1 Engine - Engine
Briggs and Stratton 08P502-0008-H1 Engine - Engine
Briggs and Stratton 08P502-0008-H5 Engine - Engine
Briggs and Stratton 08P502-0009-H1 Engine - Engine
Briggs and Stratton 08P502-0010-H1 Engine - Engine
Briggs and Stratton 08P502-0010-H5 Engine - Engine
Briggs and Stratton 08P502-0011-H1 Engine - Engine
Briggs and Stratton 08P502-0011-H5 Engine - Engine
Briggs and Stratton 08P502-0012-H1 Engine - Engine
Briggs and Stratton 08P502-0013-H1 Engine - Engine
Briggs and Stratton 08P502-0014-H1 Engine - Engine
Briggs and Stratton 08P502-0015-H1 Engine - Engine
Briggs and Stratton 08P502-0016-H1 Engine - Engine
Briggs and Stratton 08P502-0017-H1 Engine - Engine
Briggs and Stratton 08P502-0018-H1 Engine - Engine
Briggs and Stratton 08P502-0019-H1 Engine - Engine
Briggs and Stratton 08P502-0020-H1 Engine - Engine
Briggs and Stratton 08P502-0021-H1 Engine - Engine
Briggs and Stratton 08P502-0021-H5 Engine - Engine