Part Location Diagram of 697478 Briggs and Stratton Retainer-seal
See part E-724 in the diagram
Replacing your Briggs and Stratton Engine Retainer-seal
( Grid squares measure 1x1 inch )

Retainer-seal 697478

Manufactured by:
Briggs and Stratton
ERP Number:
ERP9065536
Part Number:
697478
Original Equipment Manufacturer ?
  Works with your model  103M02!
$7.51
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   103M02!

Product Description

?

This is a genuine Briggs and Stratton part for use with Lawn and Garden Equipment Engines. The carburetor needle valve seat gasket makes a seal between the needle valve and the base of the carburetor. This part is sold individually. The most common reason for replacing a gasket is if the carburetor is leaking fuel. The tool that you will need to replace the seal gasket is a 10mm socket.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • MTD
  • Craftsman
  • Poulan
This part works with the following products:
  • Engine
  • Lawn Mower
  • Washer

Videos For installing this part.

?
Replacing your Retainer-seal

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Lock ring to hold o-ring inplace on carb.

DAVID from Lebanon, Ohio

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
697478
Removed gas tank with carb attached. Snapped lock ring in place. Positioned carb over engine intake and secured gas to the engine. The lock ring sealed the o-ring and stopped the erratic running of the engine. Air was leaking by the o-ring without the lock ring.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9065536
Manufacturer Part Number: 697478
Brand Model Number Description
Briggs and Stratton 020733-00 Washer - Gas Power Washer
Briggs and Stratton 021020-00 Washer - Gas Power Washer
Briggs and Stratton 021022-00 Washer - Gas Power Washer
Briggs and Stratton 021025-00 Washer - Gas Power Washer
Briggs and Stratton 021027-00 Washer - Gas Power Washer
Briggs and Stratton 08P502 Engine - Briggs & Stratton Small Engine Model 08P502/0029-H1 (08P502/0029H1, 08P502/0029 H1) Parts
Briggs and Stratton 08P502-0002-H1 Engine - Engine
Briggs and Stratton 08P502-0003-H1 Engine - Engine
Briggs and Stratton 08P502-0004-H1 Engine - Engine
Briggs and Stratton 08P502-0005-H1 Engine - Engine
Briggs and Stratton 08P502-0005-H5 Engine - Engine
Briggs and Stratton 08P502-0006-H1 Engine - Engine
Briggs and Stratton 08P502-0007-H1 Engine - Engine
Briggs and Stratton 08P502-0008-H1 Engine - Engine
Briggs and Stratton 08P502-0008-H5 Engine - Engine
Briggs and Stratton 08P502-0009-H1 Engine - Engine
Briggs and Stratton 08P502-0010-H1 Engine - Engine
Briggs and Stratton 08P502-0010-H5 Engine - Engine
Briggs and Stratton 08P502-0011-H1 Engine - Engine
Briggs and Stratton 08P502-0011-H5 Engine - Engine
Briggs and Stratton 08P502-0012-H1 Engine - Engine
Briggs and Stratton 08P502-0013-H1 Engine - Engine
Briggs and Stratton 08P502-0014-H1 Engine - Engine
Briggs and Stratton 08P502-0015-H1 Engine - Engine
Briggs and Stratton 08P502-0016-H1 Engine - Engine
Briggs and Stratton 08P502-0017-H1 Engine - Engine
Briggs and Stratton 08P502-0018-H1 Engine - Engine
Briggs and Stratton 08P502-0019-H1 Engine - Engine
Briggs and Stratton 08P502-0020-H1 Engine - Engine
Briggs and Stratton 08P502-0021-H1 Engine - Engine