Armature-magneto 591459
- Manufactured by:
- Briggs and Stratton
- ERP Number:
- ERP9045176
- Part Number:
- 591459
Does this part fit my model?
Need help finding your model number?Jump to:
Product Description
?It is an authentic amature-magneto (ignition coil) which was specially designed for use with Briggs and Stratton engines used on lawn and garden equipment. The purpose of this item is to deliver electric current for the ignition system. It produces pulses of high voltage which then are sent to the spark plugs. It is mainly made out of metal and it is sold individually. Please note a spark plug boot is sold separately. Please note replacing this module would differ based on your unit, however the basic steps would be the same. To complete this repair you would need screwdriver set. • Remove the housing/covers from the unit • Remove the spark plug • Bind the cylinder • Remove the air filter cover and side cover • Remove the throttle cable from the carburetor • Disconnect the wires • Remove old ignition coil • Install new ignition coil • Install the red wire • Set the gap • Install the black wire • Reassembly and test the unit
Frequently Purchased Together
?Troubleshooting
- Will Not Start
- Briggs and Stratton
- Toro
- Cub Cadet
- Simplicity
- Craftsman
- Generac
- Poulan
- Murray
- Engine
- Lawn Mower
- Lawn Tractor
- Snow Blower
- Generator
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Ask our experts a question about this part and we'll get back to you as soon as possible!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
- < Prev
- 1
- Next >
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hello Dan, thank you for your inquiry. For the engine model 31p777 0348-E1, we find the correct Magneto to be part 591459. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Hello Robert, thank you for writing. We suspect the model is 350447-1118-A1 instead of 305447-1118-A1 may be the reason that you were unable to find the correct parts. The Armature-Magneto is part 591459. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
No start,no spark.
Helmuth from EauClaire, Wisconsin
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
- Parts Used:
- 591459
Very difficult to start, and ran poorly (like it was \"missing\") after eventually starting
Jose from LOS LUNAS, New Mexico
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
- Parts Used:
- 591459
2. Removed old Armature-Magneto (Ignition coil)
3. Disconnected \"kill\" wire
4. Used Emory cloth to clean around flywheel
5. Used air compressor to blow dust from around flywheel
6. Wiped around flywheel with rag for a clean surface on flywheel
7. Lined up Magnets ... Read more on flywheel with the place for new Armature-Magneto
8. Place new Armature-Magneto in-place where old one removed
9. Place Business card between magnets and new Armature-Magneto (for gap setting)
10. Installed new Armature-Magneto (Ignition coil) trying hard Not to over-tighten screws
11. Removed Business card by turning flywheel
12. Re-connected \"kill\" wire
13. Replaced Flywheel Cover
14. Started Easy, and ran great (no missing)
The plug wire was melted.
Rich from Le Roy, Minnesota
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set, Wrench set
- Parts Used:
- 591459
2. Removed the engine cover.
3. Removed the old Armature-Magneto.
4. One of the screws holding the Armature-Magneto was rusted in, so broke off in the head.
5. Drilled out old screw and tapped new threads for new screw.
6. Placed new Armature-Magneto ( per included instructions) wit ... Read more h new screws.
7. Replaced engine cover and hood parts in reverse.
8. Started engine on fist attempt !!!!!
Die while idling, mostly, also while riding mower, after 1-2 hours of mowing lawn
Gerald from BURLINGTON, Massachusetts
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set, Wrench set
- Parts Used:
- 591459
Engine would cut off after 10-15 minuted of running and would continue to cut off in increasing intervals
Chris from Henrico, Virginia
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
- Parts Used:
- 591459
Had no fire at plug
Richard from Panama City, Florida
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Socket set
- Parts Used:
- 591459
2)Took coil off
3)Replaced with new coil and took a business card to set the air gap
4)Tightened the screws on the coils turned by hand to remove business card
5)Reinstalled flywheel shield and cranked up lawnmower all went well
No spark
Duane from SEAFORD, Delaware
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Socket set, Wrench set
- Parts Used:
- 591459
intermittent stalling and would not re-start immediately. lack of spark
Alan from Moreland Hills, Ohio
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
- Parts Used:
- 591459
removed engine cover
removed flywheel fan
removed old magneto armature
Installed new magneto armature
set gap between armature and flywheel magnet
reassembled
Rough running
Jim from Royal Palm Beach, Florida
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Socket set
- Parts Used:
- 591459
The mower would stall after use of about 1 hr. I had done the usual. Check gas cap, change plug, clean carb etc. This was last resort. So far so good
Steven from Pelham, New Hampshire
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
- Parts Used:
- 591459
Remove engine cover
Remove cowl and oil dipstick
Unplug spark plug boot
Remove 2 screws holding armature down. Note pay attention to the gap between it and the motor
Wire brush and clean old mounting area
Note armature does not come with spark plug boot but does come with spar ... Read more k plug connector attached.
Reverse to install
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 591459
| Brand | Model Number | Description |
|---|---|---|
| Briggs and Stratton | 01149-0 | Generator - Briggs & Stratton Generator Model 01149-0 (011490, 01149 0) Parts |
| Briggs and Stratton | 01191-0 | Generator - Briggs & Stratton Generator Model 01191-0 (011910, 01191 0) Parts |
| Toro | 02000 | Lawn Mower - 02000/Serial: 90001-99999 |
| Toro | 02001 | Lawn Mower - 02001/Serial: 80001-89999 |
| Toro | 02002 | Lawn Mower - 02002/Serial: 80001-89999 |
| Toro | 04351 | Lawn Mower - 04351/Serial: 200000601-200999999 |
| Toro | 04352 | Lawn Mower - 04352/Serial: 30001-39999 |
| Toro | 04353 | Lawn Mower - 04353/Serial: 30001-39999 |
| Toro | 04354 | Lawn Mower - 04354/Serial: 200000001-200000600 |
| Toro | 04356 | Lawn Mower - 04356/Serial: 200000001-200999999 |
| Toro | 04357 | Lawn Mower - 04357/Serial: 240000001-240999999 |
| Toro | 07273 | Engine - 07273/Serial: 313000501-313999999 |
| Toro | 07273TC | Engine - 07273tc/Serial: 313000001-313999999 |
| Toro | 08703 | Lawn Mower - Toro Lawn Mower Model 08703/SERIAL: 313000001-313999999 (08703/SERIAL:313000001313999999, 08703/SERIAL: 313000001 313999999) Parts |
| Toro | 08705 | Lawn Mower - Toro Lawn Mower Model 08705/SERIAL: 313000001-313999999 (08705/SERIAL:313000001313999999, 08705/SERIAL: 313000001 313999999) Parts |
| Toro | 08881 | Lawn Mower - 08881/Serial: 30001-39999 |
| Toro | 08881TE | Lawn Mower - 08881te/Serial: 60001-69999 |
| Toro | 08884 | Lawn Mower - 08884/Serial: 280000001-280000200 |
| Toro | 08885 | Lawn Mower - 08885/Serial: 260000001-260999999 |
| Toro | 08886 | Lawn Mower - 08886/Serial: 260000001-260999999 |
| Simplicity | 10560EX | Snow Blower - Simplicity Snowblower Model 10560EX Parts |
| Simplicity | 1060E | Snow Blower - Simplicity Snowblower Model 1060E Parts |
| Simplicity | 1060M | Snow Blower - Simplicity Snowblower Model 1060M Parts |
| Briggs and Stratton | 111902-0015-99 | Engine - Engine |
| Briggs and Stratton | 111902-0016-99 | Engine - Engine |
| Briggs and Stratton | 111902-0017-99 | Engine - Engine |
| Briggs and Stratton | 111902-0018-99 | Engine - Engine |
| Briggs and Stratton | 111902-0101-99 | Engine - Engine |
| Briggs and Stratton | 111902-0102-99 | Engine - Engine |
| Briggs and Stratton | 111902-0103-99 | Engine - Engine |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.