Part Location Diagram of 493537S Briggs and Stratton Filter-a/c Foam
See part A-535 in the diagram
( Grid squares measure 1x1 inch )

Filter-a/c Foam 493537S

Manufactured by:
Briggs and Stratton
ERP Number:
ERP8983404
Part Number:
493537S
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(16 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

Genuine Manufacturer Sourced replacement part used on a variety of Briggs and Stratton Engines. This filter adds a second layer of protection against airborne-dirt particle ingestion. This is a Foam Pre-Cleaner which is Sold Individually. Please note a Paper Filter and a Cover are both Sold Separately.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Craftsman
  • Lawn Boy
  • Simplicity
  • Troy-Bilt
  • Husqvarna
This part works with the following products:
  • Engine
  • Lawn Mower
  • Pressure Washer
Part# 493537S replaces these:
4147, 493537,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(7 Reviews)
Click to filter by ratings:
  • 5 stars
    7
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(16 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Lost the air filter housing and the carb assembly worked backwards

Stephen from Brookhaven, Pennsylvania

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Parts Used:
692523, 692298, 692021, 690670, 493537S
I didn\'t know if the new bracket-control would work until I actually removed it via a few screws and small rachet wrench and placed it in position. But it was exact match to the engine.
Did you find this story helpful?
Thank you for voting!

Needed new filter and cover

Tom from Duncanville, Texas

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
692298, 493537S
Removed the air cleaner cover, then removed the foam filter and placed the new one in. Then I installed the new air cleaner cover.
Did you find this story helpful?
Thank you for voting!

Lawn mower not in use for 10 years +, needed over all repairs

Robert from Apple Valley, California

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Replace carburetor, primer ball, cleaned engine grime,air filter and replaced cutting blade. save $650.00 by not purchasing a new lawn mower. the service and assistance was outstanding and helpful.thank you to all your team

Did you find this story helpful?
Thank you for voting!

New 21\" front self propelled push mower 190cc B&S engine with less than 5 hours use. mower blade found part of fallen tree limb and it jammed between blade and mower deck. The impact broke the cam\'

Kent from Leroy, Michigan

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Removed blade
Removed engine
Drained oil and fuel.
Removed crankcase cover and cylinder head.
Removed damaged camshaft assembly and oil slinger
Inspected crankshaft valves and lifters for damage (none)
Inspected installed crankshaft oil seal for tears/damage(none)
Used assembly lube on all mo ving parts.
Installed valves valve springs and keepers.
Installed lifters
Installed new cam aligned crankshaft/cam timing marks.
Piston at TDC rotated counter clockwise .250\" to check valve to lifter clearance
Installed sump gasket replaced cover and torqued bolts to spec
Installed new cylinder head gasket and torqued cylinder head bolts to spec
Finished reassembly installed motor on to mower deck put on new blade
Pulled starter rope it started let engine warm up get the oil flowing.
MADE sure there were no gremlins in the yard to kill my mower again and cut the grass.






Did you find this story helpful?
Thank you for voting!

Pressure washer engine left standing for 7 years, carb gummed up, air filter broken off. Gas pouring out of carb.

Robert from Duluth, Georgia

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Socket set
1) Stripped the carb, ordered parts
2) Soaked the carb parts in NAPA carb cleaner
3) reassembled using the genuine B&S parts obtained from ereplacementparts.com
4) installed new plug
5) straightened out the bent air filter bracket, installed new cover and element.
6) engine started and ran on 3rd or 4th pull
Did you find this story helpful?
Thank you for voting!

DIRTY AIR FILTER PRE CLEANER

Anthony from OLYPHANT, Pennsylvania

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
493537S
UNSCREWED COVER, REPLACED PART AND REPLACED COVER.
Did you find this story helpful?
Thank you for voting!

Primer bulb was cracked and torn. I could not not prime the carb.

Kenneth from Emmett, Idaho

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
694395, 692667, 493537S
Removed the air cleaner housing which held the primer bulb using a 10mm socket. Used a screw driver to release the retainer clip from the breather housing which held in the primer bulb. pulled out the bulb and clip. Inspected the clip for chips and cracks to see if it needed replacement, it was in good condition. I then cleaned out th e oriface for the bulb and lightly lubed it with a touch of oil. Pushed the primer bulb in place followed by the retainer clip. Put the air breather back on with the new carb gasket, carb side, new paper filter and then the prefilter. Tested the new primer bulb and the engine started on the second try. a clear success.

It was very simple and straight forward.
Did you find this story helpful?
Thank you for voting!

Old dirty filter

Jerry from Agua Dulce, California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
493537S
Remove the air cleaner cover and replaced the filter
Did you find this story helpful?
Thank you for voting!

Water pump was not working or didi not produce high presure.

Roberto from Bayamon, Puerto Rico

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Parts Used:
491055T, 796335, 493537S
The conecting pin or key between the motor and the pump was broken. It was replaced and it is working very ell.
Did you find this story helpful?
Thank you for voting!

Air leak from gasket

gary from kissimmee, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
795629, 493537S
Took carburetor off and cleaned flange for air box assemble replace gasket with the one I ordered and installed new air filter. Engine ran perfect. The parts work perfect.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP8983404
Manufacturer Part Number: 493537S
Brand Model Number Description
Briggs and Stratton 01282-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01282-0 (012820, 01282 0) Parts
Craftsman 0764-0-580762250 Pressure Washer - 0764-0 - 580.762250, 2,250 Psi Craftsman
Briggs and Stratton 0795-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 0795-0 (07950, 0795 0) Parts
Craftsman 0795-0-580677220 Pressure Washer - 0795-0 - 580.677220, 2,250 Psi Craftsman
Lawn Boy 10416 Lawn Mower - Gold Series Lawnmower
Lawn Boy 10421 Lawn Mower - Gold Series Lawnmower
Lawn Boy 10516 Lawn Mower - Gold Series Lawnmower
Lawn Boy 10521 Lawn Mower - Gold Series Lawnmower
Briggs and Stratton 110400-110499 Engine - To 110499 (0111,0112,0114) Engine
Briggs and Stratton 110402-0109-E1 Engine - Engine
Briggs and Stratton 110402-0161-E1 Engine - Engine
Briggs and Stratton 110402-0180-E1 Engine - Engine
Briggs and Stratton 110402-0182-E1 Engine - Engine
Briggs and Stratton 110402-0191-E1 Engine - Engine
Briggs and Stratton 110402-0206-E1 Engine - Engine
Briggs and Stratton 110402-0218-E1 Engine - Engine
Briggs and Stratton 110412-0023-E1 Engine - Engine
Briggs and Stratton 110412-0038-E1 Engine - Engine
Briggs and Stratton 110412-0043-E1 Engine - Engine
Briggs and Stratton 110412-0060-E1 Engine - Engine
Briggs and Stratton 110412-0101-E1 Engine - Engine
Briggs and Stratton 110412-0105-E1 Engine - Engine
Briggs and Stratton 110412-0110-E1 Engine - Engine
Briggs and Stratton 110412-0111-E1 Engine - Engine
Briggs and Stratton 110412-0114-E1 Engine - Engine
Briggs and Stratton 110412-0115-E1 Engine - Engine
Briggs and Stratton 110412-0116-E1 Engine - Engine
Briggs and Stratton 110412-0122-E1 Engine - Engine
Briggs and Stratton 110412-0124-E1 Engine - Engine
Briggs and Stratton 110412-0125-E1 Engine - Engine