Part Location Diagram of 591299 Briggs and Stratton Equipment Engine Carburetor
See part D-125D in the diagram
( Grid squares measure 1x1 inch )

Equipment Engine Carburetor 591299

Manufactured by:
Briggs and Stratton
ERP Number:
ERP9983379
Part Number:
591299
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(17 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This carburetor is for lawn and garden equipment engines. Carburetor mixes air and gas before the fuel mix goes to the engine. Wear work gloves to protect your hands and work in a well-ventilated area during this repair.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Cub Cadet
  • Toro
  • Simplicity
This part works with the following products:
  • Engine
  • Chipper Shredder
Part# 591299 replaces these:
690046, 693751, 694174, 698474, 698478, 698810, 791991, 798650,

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(8 Reviews)
Click to filter by ratings:
  • 5 stars
    7
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(17 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bad gas had plugged up old carb

James from Norco, California

8 of 8 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
591299
Very easy to remove and replace. One screw removes air filter, 2 screws remove air intake, 2 bolts remove carb.
Did you find this story helpful?
Thank you for voting!

Shoot starter fluid into carburetor and engine would run for a few seconds and die

John from BERTHOUD, Colorado

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
591299
Removed air filter housing
Removed carburetor
Installed new carburetor
Replaced air filter housing
Two pulls and it started up. Starts easier than when it was new
Did you find this story helpful?
Thank you for voting!

It needed a new carburetor

Harold from Arcadia , Oklahoma

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
591299
I took the old carburetor off. Put the new one on and it started with one pull of the rope.
Did you find this story helpful?
Thank you for voting!

Bad carburetor

Manuel from Oakdale, California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
591299, 795643
Took off the old carb and replaced with the new one.
Did you find this story helpful?
Thank you for voting!

Screws connecting the air cleaner base to the carburetor had broken off and I couldn\'t get the broken screws out.

Charles from Huntsville, Alabama

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
591299
1. Disconnected the spark plug wire.
2. Removed the air cleaner and base.
3. Removed the gas line from the carburetor.
4. Unscrewed the carburetor, then unhooked throttle linkage and spring from the carburetor.
5. Attached the throttle linkage and the spring to the new carburetor.
5. Installed the new carbure tor.
Did you find this story helpful?
Thank you for voting!

Engine surging

Ronald from Meyersville, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
591299
Garden tiller was not that old, thanks to the ethanol in gas now a days. I\'ve tried all the carb cleaners don\'t have any luck with them. Removed 2 - screws on air filter housing gas line , 2 bolts on carb . Flushed gas tank wit new gas serveral times installed new carburetor, put in fresh gas. pulled about 6 times runs like a new one. I did same thing on pole saw I have, and it works great. I have 2 more to do its cheaper than buying a new piece of equipment.
Did you find this story helpful?
Thank you for voting!

Carburetor float and needle valve broke.

Gerald from WEST MONROE, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
591299
Removed air filter and housing, and disconnected fuel line to carburetor.

Removed two carburetor mounting bolts, removed carburetor and disconnected throttle rod and spring.

Connected throttle rod and spring to new carburetor and installed new carburetor and two mounting bolts.

Reconnected fuel li ne to carburetor, and reinstalled air filter housing.

Filled fuel tank and started engine on first pull.
Did you find this story helpful?
Thank you for voting!

Power washer would not start. Carburetor not functioning properly. Fuel feed to carb not flowing. Confirmed by adding fuel directly into carb. It started and shutdown when fuel was used up.

HAROLD from EMMAUS, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Socket set
Parts Used:
591299
I replaced the carburetor and it started on the first pull. The power washer functioned great for my patio cleaning project.
Did you find this story helpful?
Thank you for voting!

Carburetor gummed up. Engine would not state. Once replaced started on first pull.

Gary from HOLBROOHolbrookK, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
591299
removed cover and air filter
removed two bolts. replaced new carburetor with 2 new gaskets
replaced 2 new bolts.
replaced air filter and cover.
Did you find this story helpful?
Thank you for voting!

Roto-tiller wouldn\'t run. gas had ruined the carburetor

jerry from SPENCER, Indiana

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
591299
replaced the carburetor after several attempts to clean the old one.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9983379
Manufacturer Part Number: 591299
Brand Model Number Description
Briggs and Stratton 120212-0115-B1 Engine - Engine
Briggs and Stratton 120212-0115-B8 Engine - Engine
Briggs and Stratton 120212-0115-E1 Engine - Engine
Briggs and Stratton 120212-0117-B1 Engine - Engine
Briggs and Stratton 120212-0117-B8 Engine - Engine
Briggs and Stratton 120212-0117-E1 Engine - Engine
Briggs and Stratton 120212-0118-B1 Engine - Engine
Briggs and Stratton 120212-0118-B8 Engine - Engine
Briggs and Stratton 120212-0118-E1 Engine - Engine
Briggs and Stratton 120212-0118-E8 Engine - Engine
Briggs and Stratton 120212-0127-B1 Engine - Engine
Briggs and Stratton 120300 Engine - Engine
Briggs and Stratton 120302-0299-B1 Engine - Engine
Briggs and Stratton 120302-0299-B8 Engine - Engine
Briggs and Stratton 120302-0299-E1 Engine - Engine
Briggs and Stratton 120302-0300-B1 Engine - Engine
Briggs and Stratton 120302-0300-B8 Engine - Engine
Briggs and Stratton 120302-0300-E1 Engine - Engine
Briggs and Stratton 120302-0432-B1 Engine - Engine
Briggs and Stratton 120302-0432-B8 Engine - Engine
Briggs and Stratton 120302-0432-E1 Engine - Engine
Briggs and Stratton 120302-0432-E8 Engine - Engine
Briggs and Stratton 120302-0433-B1 Engine - Engine
Briggs and Stratton 120302-0433-E1 Engine - Engine
Briggs and Stratton 120302-0769-B8 Engine - Engine
Briggs and Stratton 120302-0769-E8 Engine - Engine
Briggs and Stratton 120302-0781-B1 Engine - Engine
Briggs and Stratton 120302-0781-B8 Engine - Engine
Briggs and Stratton 120302-0781-E1 Engine - Engine
Briggs and Stratton 120302-0781-E8 Engine - Engine