Part Location Diagram of 273113S Briggs and Stratton Gasket-intake
See part C-52 in the diagram
( Grid squares measure 1x1 inch )

Gasket-intake 273113S

Manufactured by:
Briggs and Stratton
ERP Number:
ERP8941262
Part Number:
273113S
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

1- 2 hours 

(6 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is the intake gasket designed for various models of small engine equipment, including blower vacuums. The intake gasket plays a crucial role in internal combustion engines, creating an airtight seal between the cylinder head and the intake manifold. This seal prevents the leakage of air, coolant, or fuel. Our intake gasket is an official OEM (Original Equipment Manufacturer) part, crafted from high-quality composite material. If you notice issues such as engine misfiring, overheating, coolant or oil leaks, or overall poor performance, it is essential to inspect and replace your intake gasket promptly. Regular maintenance of your engine and equipment can help prevent damage to other components and reduce the frequency of repairs. To replace this gasket, begin by disconnecting the spark plug and opening the air intake cover to access the air filter. Use a wrench to remove the air filter housing, exposing the internal components. Replace the old intake gasket, reassemble the housing, and put your engine back together. Turn on your equipment and monitor its performance to ensure it runs smoothly.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Craftsman
  • Simplicity
This part works with the following products:
  • Engine
  • Leaf Blower / Vacuum
  • Generator
  • Lawn Mower
  • Dethatcher
Part# 273113S replaces these:
271936, 272585, 273113, 273113S, 4200, 490522,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Would not start. Could not pull gas up from tank

Glen from Mobile, Alabama

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
692241, 692189, 273113S, 272538S
Removed carburetor from engine and fuel tank.
Removed old gaskets and cleaned up carburetor.
Reassembled unit using new gaskets, diaphragm and started engine.
After warm up adjusted air mixture screw.
Did you find this story helpful?
Thank you for voting!

Removed and rebuilt carburetor

William from Pittsfield, Maine

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
690766, 691823, 495606, 273113S
Removed, disassembled,cleaned, re-assembled carburetor, then re-installed carburetor.
Did you find this story helpful?
Thank you for voting!

Engine would run under a load.

Gregory from Holualoa, Hawaii

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
692241, 691821, 273113S, 272538S
1. Removed Gas tank and carburetor.
2. Dissembled carb, cleaned gas tank, replaced carb diaphragm.
3. Reassemble.
4. Replaced pull rope.


the site had parts necessary and shipped them promptly, great company to work with.
Recommend them highly.
Did you find this story helpful?
Thank you for voting!

Guel tank rusted out.

Robert from Concord, North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
692241, 273113S
Removed tank, the tank is attached to carburetor from engine. Cut tank in half since there are no replacements avaliable , sand blasted inside and wire welded back together and recoated inside. Repainted tank. Reassembled tank to carburetor and reinstalled to engine and was done.
Did you find this story helpful?
Thank you for voting!

Gas powered pump set too long, fuel went bad and carb diaphragm needed replacement.

Patrick from Harrisonville, Missouri

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
Parts Used:
692241, 273113S, 272538S
Carb had to come off for a soak and clean. Had to replace gasket to head and gasket to fuel tank, along with fuel supply diaphragm. E-replacement had the parts I needed at a good price in stock. Parts were easy to locate on site with pictures to confirm I was getting right part. Prompt shipping. Pump started first pull. What more cou ld you ask for. (Well I guess that their warehouse was next door.)
Did you find this story helpful?
Thank you for voting!

Chipper was left with ethanol fuel and rotted the bottom of the fuel tank out and left the carb full of yellow GÇ£sandGÇ¥. The rewind spring was broken, the engine would not turn over, as it turned ou

Steve from Spanaway, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set, Wrench set
Removed the fuel tank and carb cleaned the carb and installed the rebuild kit. I cut the damaged metal out of the fuel tank, cleaned the rust out of the rest of the tank with a needle scaler and welded a new bottom onto the tank. Next I pulled the blower housing off and replaced the rewind spring. After that I pulled the housing off the c hipper, took the flails apart and freed them up, cleaned the mouse nest out, gave everything a coat of paint.
Now I have a good chipper that starts on the second pull that I saved from going to the dump for very little money.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8941262
Manufacturer Part Number: 273113S
Brand Model Number Description
Briggs and Stratton 01134-0 Generator - Briggs & Stratton Generator Model 01134-0 (011340, 01134 0) Parts
Toro 02700 Lawn Mower - Toro Lawn Mower Model 02700 Parts
Toro 02701 Lawn Mower - Toro Lawn Mower Model 02701/SERIAL: 313000001-313999999 (02701/SERIAL:313000001313999999, 02701/SERIAL: 313000001 313999999) Parts
Toro 02740 Lawn Mower - Toro Lawn Mower Model 02740/SERIAL: 310000001-310999999 (02740/SERIAL:310000001310999999, 02740/SERIAL: 310000001 310999999) Parts
Toro 02750 Lawn Mower - Toro Lawn Mower Model 02750/SERIAL: 313000001-313999999 (02750/SERIAL:313000001313999999, 02750/SERIAL: 313000001 313999999) Parts
Briggs and Stratton 080201-2233-01 Engine - Engine
Briggs and Stratton 080202 Engine - (2305-01 - 2305-01) Engine
Briggs and Stratton 080202-1835-99 Engine - Engine
Briggs and Stratton 080202-1836-99 Engine - Engine
Briggs and Stratton 080202-1864-99 Engine - Engine
Briggs and Stratton 080202-1898-99 Engine - Engine
Briggs and Stratton 080202-2201-01 Engine - Engine
Briggs and Stratton 080202-2204-01 Engine - Engine
Briggs and Stratton 080202-2209-01 Engine - Engine
Briggs and Stratton 080202-2212-01 Engine - Engine
Briggs and Stratton 080202-2213-01 Engine - Engine
Briggs and Stratton 080202-2219-01 Engine - Engine
Briggs and Stratton 080202-2221-01 Engine - Engine
Briggs and Stratton 080202-2221-02 Engine - Engine
Briggs and Stratton 080202-2225-01 Engine - Engine
Briggs and Stratton 080202-2227-01 Engine - Engine
Briggs and Stratton 080202-2227-02 Engine - Engine
Briggs and Stratton 080202-2234-01 Engine - Engine
Briggs and Stratton 080202-2234-02 Engine - Engine
Briggs and Stratton 080202-2235-01 Engine - Engine
Briggs and Stratton 080202-2237-01 Engine - Engine
Briggs and Stratton 080202-2238-01 Engine - Engine
Briggs and Stratton 080202-2238-02 Engine - Engine
Briggs and Stratton 080202-2240-01 Engine - Engine
Briggs and Stratton 080202-2244-01 Engine - Engine