Engine Sump 84002141
- Manufactured by:
- Briggs and Stratton
- ERP Number:
- ERP16443576
- Part Number:
- 84002141
Product Description
?This is a genuine OEM sourced component which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a damaged engine sump that helps to secure the crankshaft, please make sure to check the appropriate diagrams of your model for the correct location and application of this part. This high-quality item is made of durable metal and is sold individually, keep in mind it includes the gasket to ensure an air-tight seal.
Troubleshooting
- Briggs and Stratton
- Toro
- Cub Cadet
- Craftsman
- MTD
- Lawn Boy
- Engine
- Lawn Mower
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Sump cracked.
Larry from Macon, Missouri
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
- Parts Used:
- 84002141
Bought mower for $20. Essentially new - previous owner hit pipe and broke sump ...
Leonard from Raleigh, North Carolina
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench set
1. Drain oil and fuel; remove control cables, blade, and then remove engine from mower base.
2. Clean end of crankshaft ... Read more with emery paper so shaft will move easily through old sump bearing. Put oil on shaft before you remove old sump.
3. Keep engine positioned with shaft upward; remove sump bolts. Tap sump to break seal and remove sump. (Always keep engine with shaft upward when sump is off! Otherwise camshaft will fall out and you\'ll have to re-time.)
4. Clean old gasket residue from block. A razor blade works nicely for this. Be careful not to score the soft aluminum mating surface during this operation.
5. Install new gasket - comes with sump - and reinstall sump. Torque bolts to 6 ft-lb.
6. Install new oil seal. Flat side goes to the outside. Use a large, deep socket or other sleeve to CAREFULLY drive the seal into place.
7. Reinstall engine to mower base; reinstall blade. Reconnect control(s) cables.
8. Add oil and fuel and you\'re ready to go ...
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 84002141
| Brand | Model Number | Description |
|---|---|---|
| Briggs and Stratton | 01058-0 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01058-0 (010580, 01058 0) Parts |
| Briggs and Stratton | 021020-00 | Washer - Gas Power Washer |
| Briggs and Stratton | 021025-00 | Washer - Gas Power Washer |
| Lawn Boy | 0363 | Lawn Mower - Lawn Boy Lawn Mower Model 0363 Parts |
| Lawn Boy | 0425A | Lawn Mower - Lawn Boy Lawn Mower Model 0425A Parts |
| Lawn Boy | 0427 | Lawn Mower - Lawn Boy Lawn Mower Model 0427 Parts |
| Craftsman | 0616-0-71676150 | Pressure Washer - 0616-0 - 71.676150, 1,500 Psi (Rev 0 1/30/96) Craftsman |
| Briggs and Stratton | 08P502 | Engine - Briggs & Stratton Small Engine Model 08P502/0029-H1 (08P502/0029H1, 08P502/0029 H1) Parts |
| Briggs and Stratton | 08P502-0002-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0003-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0004-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0005-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0005-H5 | Engine - Engine |
| Briggs and Stratton | 08P502-0006-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0007-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0008-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0008-H5 | Engine - Engine |
| Briggs and Stratton | 08P502-0009-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0010-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0010-H5 | Engine - Engine |
| Briggs and Stratton | 08P502-0011-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0011-H5 | Engine - Engine |
| Briggs and Stratton | 08P502-0012-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0013-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0014-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0015-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0016-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0017-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0018-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0019-H1 | Engine - Engine |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.