This cord is a genuine Milwaukee replacement part and is sold individually. This cord is used on the Milwaukee tool listed below It is a 3 wire cord with 3 prongs and does need to be grounded to the tool.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Quick repair
Having correct ends on wire made the job go quick. Some cord you get may be universal so you have to cut to length and then add which connecter you need.
Guest - August 31, 2019
Verified Purchase
★★★★★
★★★★★
Tool repairs
Worked great i wish I could get fast free shipping.
I order alot of parts here.
CLOSE - October 20, 2022
Verified Purchase
★★★★★
★★★★★
Was not direct replacement
I thought when I purchased it would be a direct replacement part. I got cord sets with no ends on them for the tool.
Don - July 22, 2023
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
30 - 60 mins
(8 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
This was an older Milwaukee \"Hole Hawg\" drill with a broken handle and frayed cord. The correct handle was NLA, so I repaired it with a handle kit from a current unit. The power cord exits the handle in a different spot from the old handle and I missed buying the clamp for the power cable as well as the screws to hold the new handle tog
... Read moreether. There is a locking button on the older power switch that the new units don\'t have, so I had to drill the new handle for the button. Other than that, the old switch fit, and I was able to fit the new handle to the old drill. There is a small half-round gap between the new handle and the drill body where the old power cord used to go, but that is easily filled or left as-is. It was nice that in all of the years of production, the engineers at Milwaukee made it so the new parts would still fit the older drills with a minimum of trouble. It\'s also nice to see an old drill getting a new life with repair parts from eReplacementparts.com!
Read less
Did you find this story helpful?
Thank you for voting!
WonÆt reverse, cord weathered, 25 years and going strong again.
Remove the switch handle from the drill.
Remove the old cord wires from the switch and from the ground
Install the new cord to the switch with the switch clips ( YOU WILL NEED THESE )
Install the new switch and handle to the drill
I took the handle apart by removing the 5 screws with a screwdriver then I removed the cord clamp I removed the ground screw from the drill housing then I took out the cord and trigger from the handle I cut the black and white wire leaving them in the trigger so you know what side they go on then I slipped the new cord protector to the n
... Read moreew cord and cut and striped the wire to the right length then I solder on the new clips then I removed one wire at a time from the trigger and plugged the new wires in and put it all back together
1. Unplugged the unit.
2. Removed the screws in the old panel saw to expose the wires.
3. Had to remove a specialized rubber wire sleeve at the entry point of the wire into the saw portion of of the panel saw from the old wire. using a straight cut with a blade.
4. Used a heat shrink material to help secure the new
... Read morewire into the sleeve.
5. Connected the wires.
6. Re-assembled.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10122663
Manufacturer Part Number: 22-64-0121
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 22-64-0121 Milwaukee Cord Set")
_WW_1.gif "Part Location Diagram of 22-64-0121 Milwaukee Cord Set")
