Part Location Diagram of 60351 Cleco O-ring
See part A-16 in the diagram
( Grid squares measure 1x1 inch )

O-ring 60351

Manufactured by:
Cleco
ERP Number:
ERP10303949
Part Number:
60351
Original Equipment Manufacturer ?
  Works with your model  15DP-20B!
$5.95
Special Order
Minimum Quantity of 2 required

A Bit Difficult 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   15DP-20B!

Product Description

?

This is an authentic Cleco replacement part. The O-ring is designed by the manufacturer for use in nutrunners, screwdrivers, and drills. This part is made of flexible rubber, and is generally used to seal the connection with the inlet adapter. You may require a wrench and pliers when replacing this part. This item is sold individually.

Troubleshooting

This part works with the following brands:
  • Cleco
This part works with the following products:
  • Electric Drill
  • Ratchet
  • Drill

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Rotor blades were worn. Gummy residue in rotator housing

Robert from University Park, Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Wrench (Adjustable), Wrench set
Parts Used:
869121, 60351, 207035, 203615PT, 203043
1) removed cover to access screwdriver.
2) separated screwdriver into sections.
3) removed old rotors, cleaned housing in ultrasonic cleaner, dried housing and installed new rotors.
4) replaced o-rings, valve seal and screen.
5) put sections back together, replaced cover
6) tested and calibrated screwdriver. placed back into service.
Did you find this story helpful?
Thank you for voting!
  • 1