Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
16352908-1-M-Husqvarna-530095086-Edger Blade
Part Location Diagram of 530095086 Husqvarna Edger Blade
See part B-104 in the diagram
( Grid squares measure 1x1 inch )
16352908-1-S-Husqvarna-530095086-Edger Blade Part Location Diagram of 530095086 Husqvarna Edger Blade

Edger Blade 530095086

Manufactured by:
Husqvarna
ERP Number:
ERP16352908
Part Number:
530095086
Original Equipment Manufacturer ?
$6.85
★★★★★
★★★★★
16 Reviews
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(26 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is a genuine Weed Eater replacement part, it is sold individually. This blade is used on all of the edgers shown below. Its dimensions are 8-3/8 inches long and 1-1/2 inches wide. This blade when in use will hit concrete, rocks and other debris, which will shorten the blade. It is advised to keep one blade on hand.

Troubleshooting

This part works with the following brands:
  • Weed Eater
  • Craftsman
  • Husqvarna
This part works with the following products:
  • Edger
  • Trimmer
Part# 530095086 replaces these:
530095086,
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(16 Reviews)
Click to filter by ratings:
  • 5 stars
    16
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great service
The web site was easy to find and easy to use. They had what I needed at a fair price and shipping and sent it on time,
Guest - June 21, 2019
Verified Purchase
★★★★★
★★★★★
Great part
The part was as expected. Fit properly and does a good job.Especially liked your website for ease of ordering and prompt delivery.
Guest - June 25, 2019
Verified Purchase
★★★★★
★★★★★
Perfect part
The blade was just what we needed. Works great! Got here very quickly. Thank you!
Guest - July 1, 2019
Verified Purchase
★★★★★
★★★★★
Very Easy to order & replace
This was my first experience with replacement parts and it was GREAT!!! Product was exactly like original, arrived on advised date and was less cost than a 'universal' part at local big box store. I'm a very satisfied client.
Guest - July 1, 2019
Verified Purchase
★★★★★
★★★★★
Easy replacement. Great fit for my Jd 160 mower.
It was as advertised. Great part
Don - August 5, 2019
Verified Purchase
★★★★★
★★★★★
Best surprise... no surprise.
Fair price, received quickly, fit perfectly. What else would you want?
Guest - September 3, 2019
Verified Purchase
★★★★★
★★★★★
Timely delivery of correct part
Part was as described online & fit perfectly. Just what I needed.
Guest - October 22, 2019
Verified Purchase
★★★★★
★★★★★
Right Part
I can't depend on buying this part for my edger at local stores. I have purchased new blades each year from eReplacementParts. I find and get the right part and it is always timely delivered.
Stephen - March 23, 2020
Verified Purchase
★★★★★
★★★★★
Great!
Thanks for the part, service, price! Yes I recommend your service!
Guest - April 21, 2020
Verified Purchase
★★★★★
★★★★★
Blade replacement
Blade arrived within 4 days, form, fit, function is great.
Guest - May 8, 2020
Verified Purchase
  • 1
  • 2

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Ask our experts a question about this part and we'll get back to you as soon as possible!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
The center hole of my current blade is not a perfect circle as it is flat on part of the hole. Will this fit?
Ron For model number 358.773110 - February 15, 2022

Hello Ron, Thank you for your inquiry. We have researched the model number you have provided and do not show this part as compatible for your model. We show the compatible blade as part# 530095086. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
February 15, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(26 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Replaced bad blade

CHARLES from LA VALLE, Wisconsin

11 of 11 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
530095086
Simple to replace edger blade. Unbolt old blade, bolt on new blade.
Did you find this story helpful?
Thank you for voting!

Edger blade dull

Barnell from WARNER ROBINS, Georgia

10 of 10 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
530095086
Remove spark plug boot
Make sure edger is in the off position
Insert screwdriver in notch
Turn bolt clockwise
Remove old blade
Install new blade
Turn bolt counterclockwise to tighten
Remove screwdriver
Connect spark plug boot
Did you find this story helpful?
Thank you for voting!

Edger blade worn out.

Phil from Fenton, Missouri

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
530095086
Remove the nut and washer, then the old blade. Place the new blade on the shaft, then the washer and tighten the nut.
Did you find this story helpful?
Thank you for voting!

Blade stopped turning, screeching noises.

Wayne from Eagle, Idaho

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
530095086, 530071258, 530014832
1. Removed blade.
2. Removed gear cover.
3. Removed bolt holding drive gear and clutch hub together. This was not easy. Was able to kludge together a brace to hold clutch hub stationary while backing out the bolt.
4. Drive gear and double set of bearings were withdrawn from case. Used small bearing puller to pull bearing s off drive gear shaft.
5. Replaced drive gear with new one and used a deep socket same diameter as bearings to pound bearings back into place on drive gear shaft.
6. Replaced clutch assembly.
7. Lubed new gears and replaced into case.
8. Put case cover back on and installed new blade.
9. Tested
Read less
Did you find this story helpful?
Thank you for voting!

Blade wore out.

Leonard from HAMPTON, Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
530095086
Replaced the blade. Part came in early, thanks for the great service.
Did you find this story helpful?
Thank you for voting!

Gas line tubing broke and was leaking

Donald from Moyock , North Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Socket set
Parts Used:
530030179, 580236101, 530095086
I removed the old gas tank and tubing and than replaced it with the new parts. The web site provided good video of the repair which I followed. The tubing had to be manipulated to prevent kinking of the line. Make sure your gas tank is empty before starting the repair work.
Did you find this story helpful?
Thank you for voting!

Blade was spinning on the shaft. D shaped locating shoulder on the drive shaft was rounded off.

Michael from Louisville, Kentucky

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
Parts Used:
530095086, 530095070, 530016281, 530016032
Because the belleville lock washer had been left off when the blade was changed, the lock nut became loose, allowing the blade to spin on the drive shaft, rounding off the D-shaped shoulder that locked the blade In position. The fix was to replace the shaft. I also bought a new belleville lock washer and lock nut. After I had the shaft out, I wished I had also bought a new shaft support bearing, since it would have been easy to replace it with the unit already apart. To remove the shaft, start by removing the left hand thread lock nut that holds the blade on the shaft. Remove the dished belleville lock washer and blade. Removed the gearbox cover behind the blade. The drive shaft and bearing come off with the cover. Remove the snap ring or circlip that holds the shaft in the bearing. Insert the new shaft into the bearing and replace the snap ring. Insert the shaft back into the gearbox and reinstall the gearbox cover. Slip the new blade over the shaft followed by the belleville dished washer and the left hand thread lock nut. A small cordless impact driver makes removal and installation of the nut very easy, but it can be done with hand tools.
Read less
Did you find this story helpful?
Thank you for voting!

EDGER BLADE WAS WORN OUT.

JAMES from GOOSE CREEK, South Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
530095086
Removed retaining nut, washer, & old blade. Put on new blade.
Did you find this story helpful?
Thank you for voting!

Blade was worn out

George from GEORGETOWN, Massachusetts

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
530095086
Simple enough, made sure Sw was in off Pos.checked new blade for rotation, installed same* away we went
Did you find this story helpful?
Thank you for voting!

Blade needed replacing

Robert from Lubbock, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
Parts Used:
530095086
Removed old blade and replaced with new blade. On bolt to remove and re install with new blade
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP16352908
Manufacturer Part Number: 530095086
Brand Model Number Description
Craftsman 35877310 Edger - Edger
Craftsman 358773110 Edger - Edger
Craftsman 358797450 Edger - Edger
Craftsman 358797550 Edger - Edger
Craftsman 358797550-EDGER Edger - Edger
Craftsman 358797551 Edger - Edger
Craftsman 358797750 Trimmer - Gas Edger
Weed Eater GE21 Edger - Gas Edger
Weed Eater PE550 Edger - Gas Edger
Edger Blade
$ 6.85
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖